Request For Quotation Acquisition Of Construction Goods

Pugnp2*1.5 White Gost (300) (Copper) Voltage 380V, Core For A Mortise Lock, Material Steel-Metal, One-Sided 60Mm, In The Kit 5 Keys, Ball The Bravy Brabin For Water, Diameter 25Mm, Threaded Connection, Handle Lever, The Most Operating Temperature Of 150 Degrees, Type Of Connection Is Internal-Injected, Grout Of Inter -Seams, In A Bag Of 25 Kg. The Color Is Gray. For External And Internal Work. Frost -Resistant, Moisture Resistant. Composition: Cement, Marble Flour, Polymer Additives. Application: It Is Used For Grouting Seams Between Tiles Made Of Natural, Artificial Stone And Ceramic Tiles. The Width Of The Seam Is 2-6 Mm. Preparation Of The Base: Grinding Seams, Is Carried Out After Tile Glue Hardens, But Not Earlier Than 24 Hours After Laying The Tiles. The Seams Should Be Clean. Glue For Tiles Should Not Rise By More Than Half The Depth Of The Seam. Before Grouting, The Seams Must Be Moistened. Mixing: Add A Dry Mixture To A Clean Mixture, Mix Thoroughly. Hold The Mixture For 5 Minutes And Mix Intensively Again. An Overdose Of Water Weakens The Grout. The Solution Is Suitable For Use Within 1.5 Hours After Cooking. Grout: Grout Is Applied To The Tile With Diagonal Movements With A Spatula, And Then Compacted In The Seams Until They Are Completely Filled, The Excess Is Removed. The Seams Dry After 15-30 Minutes Depending On Temperature And Humidity. The Tile Is Cleaned Of The Grout With A Damp Sponge, While Trying To Use As Little Water As Possible. After The Seams Completely Dry, The Surface Is Finally Polished By A Cotton Rag. In Dry Rooms, The Seams After Grout Must Be Moistened After A Few Hours. Tools: Rubber Troughs Or Rubber Spatula, Sponge For Cleaning Tiles, Cotton Rags For Final Polishing Of Tiles. Technical Data: The Color Is White Water Resistance Waterproof Binder Cement, Polymers Water Consumption 0.37-0.39 Liters Of Water Per 1 Kg Of The Mixture Material Consumption 0.7-1.5 Kg/M2, Depending On The Thickness Of The Suture And Tile Thickness Faction <0.14 Mm Strength When Compressed 7.5 Mpa Adhesion Strength 0.5 Mpa Operating Temperature From +5 To +25 S Mobility Pc3 Frost Resistance Of 35 Cycles The Specific Effective Activity Of Natural Radionuclides Is Not More Than 370 Bk/Kg, Glue For Porcelain Tiles And Granite Tiles. Universal, Reinforced For Heavy Tiles. For Internal And External Work. The Form Of Release Is Dry. The Weight In The Bag Is 25 Kg. Waterproof, Frost -Resistant. Frost Resistance Brand F100., A Pipe For External Sewage With A Bell, External Diameter: 200Mm, Segment Length: 3000 Mm, Wall Thickness (Mm): 5.2Mm Type Of Connection: Bellied. The Pipe Is Made Of Polypropylene, Which Has Protection Against Corrosion And Overgrowing, So The Pipe Has Been Serving For A Long Time. A Pipe For External Sewage (Brick Color), Compared With Pvc Pipes, Is More Impact -Resistant, Resistant To Short -Term Exposure To Hot Water. More Resistant To Aggressive Liquids. They Are More Expensive Than Pvc Pipes, But In Their Characteristics They Have Higher Strength, Frost Resistance And Heat Resistance. Designed For Heavy And Mobile Soils. It Is Possible To Clean With Hydrodynamic Machines, As Well As Mechanical Devices, Since Polypropylene Is Denser In Structure Than Pvc. The Seal For Polypropylene Pipes With A Diameter Of 200 Mm Is Used For The Internal Sealing Of Motionless Compounds Of Pipe From Polypropylene During The Installation Of Sewage Systems. The Sealing Ring Is Made Of High-Quality Tkmsh Rubber, Resistant To Aggressive Effects Of The Acid-Base Environment And Temperature Changes. Thanks To This, The Product With Proper Installation Is Guaranteed To Provide A Durable, Sealed And Reliable Connection. Color: Black Designed For Constant Drains With A Temperature Of +2 To +70 C And Short -Term (Within 5 Minutes) - Up To +95 C. The Manufacturer Warranty Is 7 Years, The Service Life Is 50 Years., The Foamed Bilateral Adhesive Tape (Width 30Mm, Length 2 M) Is Used For Internal And External Works And Combines High Initial Stickiness With Good Cohgesia And Adhesion. Suitable For Working With Uneven Surfaces. Spheres Of Application: Installation Of External Panels And Signs, Internal And External Installation Work, Fastening Of Car Accessories, Casing, As Well As Hooks For Clothes And Towels In The Bathroom., Abrasive Grid P60, 120*280Mm, 10Pcs, For A Grinding Grater., Welding Electrode For Manual Arc Welding. Electrode Material - Metal Alloy, Electrodes Consumption, Kg - 1.7; Minimum Working Current, And 70; Maximum Operating Current, And 108; Relative Lengthening, % 21; Type Of Goods - Welding Electrode; Set Of Electrodes - Yes; Type Of Electrode - For Manual Arc Welding; Electrode Diameter, Mm 3; Electrode Length, Cm 35; The Type Of Coating Is Routille; Welding Mode Ac/Dc; Welding In All Positions Yes; Temporary Resistance To The Gap, Mpa 450; Working Current, And 70-110; The Purpose Is Carbon Steel, Basper Brass Brand For Water, Diameter 20 Mm, Threaded Connection, Handle Lever, Maximum Operating Temperature Of 150 Degrees, Type Of Connection Internal-Injected, Disk. Type Is An Abrasive Cutting Disk. The Purpose Is For Metal. Diameter- 180 Mm. Landing Diameter- 22.23 Mm. The Thickness Of The Disk Is 1.6 Mm., Basper Brass Brand For Water, Diameter 15Mm, Threaded Connection, Handle Lever, Maximum Operating Temperature Of 150 Degrees, Type Of Connection Internal-Injected, Disk. Type Is An Abrasive Cutting Disk. The Purpose Is For Metal. Diameter- 125 Mm. Landing Diameter- 22.23 Mm. The Thickness Of The Disk Is 1.6 Mm.