Bids Are Invited For Acquisition Of Permanent Material For The Antônio Martins Da Costa Municipal Hospital, Intended For The Structuring Of Specialized Health Care, Under The Supervision Of The Municipal Health Fund Of Quirinópolis-Go, (Federal Parliamentary Amendment Proposal No. 04752947000124001), According To Specifications And Quantities Established In The Reference Term, Dfd, Etp And Other Attached Documents. | Purchases Grouped From Requests: 2020046510

Anesthesia Machine Car; Technical Specification Of Microprocessed Anesthesia Device: For Surgical Procedures In Adult, Pediatric And Neonatal Patients, Including Morbid Obesity Surgeries; Composed Of Electronic Fan, Ventilation In Open Circuit (Baraka) And Semi -Looked Systems. Calibrated Vaporizer, Valvular Filter, Self -Lating Ventilatory Circuit; Parameter Change Or Ventilation Mode Easily And Intuitively; High Resistance With Work Table With Weight Capacity Greater Than 15 Kg; Non -Oxidized Material Structure And/Or Antioxidation And Painting Treatment; Car For Transport With 04 Rolling Wheels, With At Least 02 Casters With Locks; With At Least 02 Drawers; Monitoring Of At Least 8.4 ”Touchscreen And Minimum Resolution Of 800 × 600 Pixels, Colorful, With Numerical Indicators, Minimum Of 3 Waves; Ventilatory Modes: Spontaneous And Controlled Volume; Controlled Pressure; Intermittent Mandatory Ventilation Synchronized To Volume (Simv); Supporting Pressure (Simv/Ps); Spontaneous Breath Assisted By Support; Differentiated For High And Low Flow, For Oxygen Administration, Nitrous Oxide And Single Scale For Arcompressed; Proportional Flow Control: Safety Device For Gaseous Mixture O2 En2o With A Minimum Concentration Of 25% O2 In The O2/N2o Mixture; Direct Flow Valve Of O2; Alarms: High And Low Airway Pressure, Apnea, High And Low Minute Volume, High And Low Fi2; Possibility Of Monitoring Anesthetic Gases On The Anesthesia Equipment Screen; Connections, Anvisa Registration Syringe Infusion Pump And Syringe Infusion Pump, With Programmable Electronic Control, For The Infusion Of Enteral Or Parenteral Solutions. Enable The Use Of Syringes Brands From 05 To 60 Ml. Possess Three Types Of Infusion Programming: Flow X Volume Limit, Time X Limit And Weight X Concentration X Dose. Flow From 0, 1 To 1000, 0 Ml/H (According To The Syringe Volume). Volume To Be Infused From 0, 1 To 1000 Ml. Body Weight From 0, 1 To 500, 0 Kg. Drug Concentration Limit: 0, 01 To 999, 99Mg/Ml Or 0, 99? G/Ml. Maintenance Dose Limit: 0, 99 Mg/Kg/Min Or 0, 99? G/Kg/Min. Initial Dose Limit (Induction): 0, 99? G/Kg/Min Or 0, 99 Mg/Kg/Min. 0, 1 To 10, 0 Ml/H Adjustable Kvo Rate With Default (Default) At 5, 0 Ml/H. Adjustable Bolus Flow From 0, 2 To 1200, 0 Ml/H (According To Syringe Volume) And 0, 1 To 25 Ml Adjustable Bolus Volume. Have A Programmable Electronic Pressure Sensor From 20 To 120 Kpa. Have The Following Functions: Titration, Drug Identification, Zero Volume, Kvo Adjustment, Bolus Adjustment, Occlusion Pressure Adjustment (Mmhg Or Kpa), Alarm Volume Adjustment, 0, 5 To 5, 0 Ml Volume Adjustment, Water Balance, Keyboard Block, Last Infusion Memory And Silence Alarms (As Standard). Flow, Programmed Volume, Infused Volume, Total Time And Remaining Time Of Infusion Or Has The Flow, Dose, Infused Volume And Infusion Time When Program