Tenders Are Invited For Renovation Of Poviat Road No. 1611B On The Section Czyże - Podrzeczany, Czyże Commune, Hajnów Poviat, Podlasie Voivodeship.

3 Renovation Scope: Plot No. 107/1 Czyże, Plot 159/1 Podrzewany Precinct, Czyże.2 Commune. List Of Works Provided For In The Prejudice And Cost Estimate Prepared For The Task In Question:- Corrective Milling Of Bituminous Surfaces At The Switches To The Existing Surface With The Export Of The Material From The Demolition And Its Utilization,- Making The Surface From Mineral And Bullberry Mixtures 4 Cm Thick Together With Prior Purification And Composition Of The Existing Surface Emulsion. Road,- 0.75 M Wide Gravel Shoulders With A 5 Centimeter Layer Of Mechanically Spread. As Part Of This Element, Local Preparation Of The Ground Is Expected To Cut The Roadside, Equalize Possible Windows. Excess Soil Arose As A Result Of Cutting The Roadsides. The Works Of Works And Their Estimated Multitude Were Indicated In The Bill Of Quantities And Cost Estimates For Individual Sections Of Roads Attached To This Swz.3. The Employer Informs That The Shared Bill Of Quantities Is To Make The Task Easier To Calculate The Offer Price, And Therefore Will Not Affect The Construction Process And The Amount Of The Contractual Remuneration Determined By A Flat -Rate Offer Price. 4. The Ordering Party Does Not Allow Partial Offers. 5. The Subject Of The Contract Should Be Completed In Accordance With The Technical Documentation Attached To Swz (Including The Bill Of Quantity, Cost Estimate, Detailed Technical Specifications And Landmarks), The Principles Of Technical Knowledge And Applicable Regulations. The Contractor Will Make The Subject Of The Contract From His Own New Materials. Materials Provided By The Contractor Should Meet The Quality Of The Requirements Of Products Approved For Marketing And Application In Construction In Accordance With The Requirements Of The Construction Law. 6. Materials From Demolition The Contractor Is Obliged To Utilize As Part Of The Remuneration Resulting From The Submitted Offer. The Cost Of Loading, Unloading And Transport To The Place Of Their Utilization Falls In The Salary Resulting From The Submitted Offer. The Destruct From Milling Existing Surfaces Is The Property Of The Contractor. 7. The Employer Allows The Offer Of Materials And Devices Equivalent To The Technical Documentation Indicated In The Technical Documentation, With The Proviso That Their Technical, Functional And Utility Parameters Cannot Be Worse Than The Parameters Of Materials And Devices Indicated In The Technical Documentation. The Contracting Authority Will Assess Compliance And Equivalence In Consultation With The Author Of Technical Documentation. 8. If The Description Of The Subject Of The Contract Contains Any Trademarks, Patents Or Origin, Sources Or A Special Process That Characterizes The Products Or Services Provided By A Specific Contractor- It Should Be Assumed That The Contracting Authority Has Given A Description With An Indication Of The Type And Allows The Submission Of Equivalent Offers With Technical, Operational And Utility Parameters Not Wors