Tenders Are Invited For Construction Of Lks Wilki Wilcza Lighting

1 Vd. Wilcza 0007, Registration Unit: Pilchowice.2. The Implementation Of The Subject Of The Contract Was Divided Into 2 Stages: 1) Stage I - Field Work - Complete Installation, In Accordance With The Design Documentation; 2) Stage Ii - Connection To The Connection Made By Tauron And Launching The Installation; 3. The Scope Of Work Includes: 1) Disassembly Of Existing Lamps With Columns And Cabling, 2) Cable Sewage Installation, 3) Installation Of Cable Wells, 4) Installation Of Lighting Columns On Foundations, 5) Installation Of Iron Enlargers, 6) Installation Of Lighting Control Wardrobe, 7) Connecting Works, 8) Connecting Works After Earthworks (Humus It Should Be Carried Out In Accordance With Applicable Regulations And Standards, With Particular Emphasis On Health And Safety Regulations And The Regulation Of The Minister Of Infrastructure Of February 6, 2023 On Occupational Health And Safety During Construction Works And Relevant Norms In This Respect. 4. Details Of The Execution Of Construction Works Related To The Implementation Of The Subject Of The Contract: 1) Currently On The Pitch There Are Existing Lighting Poles. Lighting Does Not Meet The Standards In The Scope Of The Second Class Of Games. The Power Supply Takes Place From The Existing Lighting Cabinet Located On The Existing Pole, Powered From The Building; 2) Power Supply: In Accordance With The Connection Conditions To The Network No. Wp/099242/2024/O11r01 Of 2024-09-20 Issued By Tauron, The Place Of Switching On The Network Will Be The Zk3a-P Measuring Set Located In The Border. The Place Of Demarcation Of Ownership Will Be The Output Clamps Of The Passing Apparatus. In Order To Supply Lighting, A Section Of The Yakxs 4X35 Mm2 Cable Line Should Be Made From The Connector And Measuring Set To The Newly Designed Lighting Wardrobe. Take The Yakxs 5X1x25 Mm2 And Yakxs 6X1x25 Mm2 Supply Cables From The Lighting Wardrobe. Between The Pillar Connector And The Luminaire, Through The Power Supply, The Ydy 3X4 Mm2 Cable Should Be Run. The Work Should Be Carried Out In Accordance With The Area Of ​​The Area And The Ideological Diagram Of The Power Supply. 3) Cable Sewage: In Order To Arrange The Cable Sewage System From Fi 50, Fi 75 And Fi 110 Pipes, A Trench With A Depth Of 70 Cm Should Be Made. This Trench Should Be Covered With A Layer Of Native Soil At Least 25Cm Thick After Laying The Pipes. Foil Or Signaling Mesh With A Thickness Of Not Less Than 0.3Mm Should Be Located Above The Pipes Arranged At A Height Of Not Less Than 25Cm. The Edges Of The Foil Should Protrude At Least 50Mm Outside The Outer Edge Of The Pipes. The Yakxs 5X1x25 Mm2 And Yakxs 6X1x25 Mm2 Energy Cables Should Be Entered Into The Cable Sewage System. Electrical Cables Should Be Provided With Durable Markers, Located At Intervals Every 10 M. The Markings Should Contain The Following Information: Type And Cross -Section Of The Cable, Cable Relationship, Owner, Year Of Arrangement. The Start Of The Works Should Be Ca