Tenders Are Invited For Delivery Of Packaging And Sterilization Tests

1 Bovie-Dick Simulation Test (134 Degrees C, Time 5.3 Min.) Self-Adhesive Strip Tests, Covered With Polymer With A Symmetrically Distributed Indicator Substance Along The Entire Length Of The Test. Company With The Standard En 285 And En Iso 11140-4 (Or Equivalent). Believers After The Sterilization Process Discolor In Accordance With The Information Provided By The Manufacturer. Pcs. 1,5002 Pcd Test Device, Consisting Of A Tube And Acid-Resistant Steel Capsules In A Plastic Housing. Increased With En 867-4 (Or Equivalent). Complay. Pcs. 13 Integrated Test For Controlling In The Process Of Sterilization With Steam. Steaming Strip Tests Covered With Polymer With A Symmetrically Distributed Indicator Substance Along The Entire Length Of The Test. Company In Accordance With The En 867-5 And En Iso 11140 (Or Equivalent) Standard After The Sterilization Process, They Discolor According To The Information Manufacturer. Pcs 867-5 (Or Equivalent). Complete With Tests From Item. A Process For The Simulation Of Minimally Invasive Surgery (Mis). The Small Gap Creates At The Same Water Pressure, Increasing The Flow Speed Through The Device, Which Facilitates The Removal Of Dirt, The Larger Gap Reduces The Flow Speed, Which Makes It Difficult To Remove Dirt. Thanks To This Structure, The Device Can Simulate Both Minimally Invasive Pipe Tools, As Well As Flexible Endoscopes. Pcs. 17 Test Device For Simulation Of Surgical Tools, Is Made Entirely Of Thermally Resistant Plastic. 48 Package Control Tests, Type 5, Covered With Self -Adhesive Laminate. For Routine Control Of Water Vapor Sterilization For Solid Porous Tools. Packaging 3200 Pcs. Pcs. 12 8009 Self -Adhesive Container Seal With Water Steam Sterilization. Packaging 1008 Pcs. Dimensions Of The Label: 25 X 70 Mm Dimensions Of The Seal Strip: 70 X 3.5 Mm Op. 612 Self-Cleaning Effectiveness Test, Level 2, Is Used For Routine Control Of The Basic Washing Processes In The Car Wash In The Car Wash. Nigrosine With A Self-Adhesive Plastic Carrier. The Package Contains 320 Pcs. (Attach The Statement Of The Sleeve Manufacturer Confirming Compliance With The Above Standards) And Having The Following Properties: - Excluded Placement Of The Test Between Layers Of Foil - All Inscriptions And Tests Outside The Packaging Space, Visible From The Foil Side - A Minimum Of Two Sterilization Indicators To Water Vapor And Ethylene Oxide In Accordance With The Pn -En Iso Iso 11140-1 / Iso 1140-1 (Or Equivalent) - Or Equivalent) - Or Equivalent) - Or Equivalent) - Uniquely Marked Opening Direction - Multiple Factory Weld (Min. 3 Paths) With A Strength Of Not Less Than 250 Nm-Paper With A Nominal Weight Of 70 G / M2 (Tolerance According To Pn-En 868-3 / En 868-3), Required Strength Characteristics Issued By The Manufacturer (And Not A Distributor) To Confirm And Assess Strength Parameters And Compliance With Pn-En 868-3 / En 868-3 (Or Equivalent)-Or Equivalent)-Or Equivalent)- Chloride Content Below 0.05 % - Sulfate Content Below