Bids Are Invited For Electrical Material For Maintenance Of The Public Lighting Network Of The Municipality Of Querência Do Norte, As Described In The Refrency Term

Lm-1 Br-1 Standard Copel Luminaire Arm, Ip Type Connector 02 X 2, 5 Mm With High Electrical Conductivity, Cadc Is Made Of Aluminum Alloy, For Use In Bimetal Connections (Al/Cu) And Al/Al (With Or Without Steel Soul), Solid Or Multifillary. 10-70 X 1, 5 - 10 M Designed For Insulating Drilling Connections To Low Voltage Networks And Air Extensions, For Isolated Aluminum And/Or Copper Conductors, Retractable Retractable Retractable Lamp Set 110 Watts Retractable Lamp, The Set Should Be Made Of Injected Or Extruded Aluminum Aluminum. The Set Should Be Composed Of Retractable Retractable Holder With Double Axis Of Movement, Horizontal And Vertical. The Base Of The Support Shall Have A Maximum Height Of 400Mm. This Mechanism Must Perform Vertical Motion With At Least 90º Degrees, And Horizontal Movement At Least 140º Degrees Of Opening. Must Have A Vertical Angle Adjustment Of At Least 10 ° Degrees. The Articulated Mechanism Should Be Able To Automatically Return To The Standard Installation Position If It Undergoes Horizontal Movement. Hermetic Sealing Of The Retractable Mechanism Against Dust And Water Admission Is Required. The Installation Should Be Done At A Minimum Height Of 4, 50 Meters. The Set Should Accompany 2 (Two) Bap Fixation Belts, With Supports, Screws And Nuts, Necessarily Made Of Steel With Fire Galvanization Treatment. The Luminaire Should Have Heat Dissipation System Through Fins Exposed To Time For Proper Thermal Exchange. These Fins Should Form A Single Part With The Surface That Will Be Installed (S) To Led Plate (S), Not Accepted Fins, Fitted, Screwed, Glued Or Soldiers. This Lens (S) Should Be Fixed By Bolt Resistant To The Action Of Time, Not Accepted Fitted, Quick Closure, Or Clips As They May Lose Pressure And Lend Over Time And Use. The Sealing Of Vital Parts Of The Lamps (Optical Set And Electronic Component Housing) Should Be Protected Against Solid Particle, Dust And Dust And Hosting. Humidity, Attested By At Least Ip66; And It Has Protection Against Mechanical Impacts, Attested By At Least Ik08. The Luminaire Sealing System Must Be Compulsory By Gasket (S), Resistant High Temperatures. This Gasket (S) Should Be Fixed By Mechanical Pressure ..., 07/04/2025