Bids Are Invited For Price Registration For Future And Eventual Acquisition Of Furniture, Devices, Equipment, Medical, Laboratory And Hospital Utensils To Meet The Demand Of Nabs (Basic Health Care Center)

Air Conditioning-Model Split Inverter, Capacity Capacity 12,000 Btus, 220 V Voltage, R-410A Rotary Compressor, R-410A Gas, Additional Features 1 Digital Digital/Timer/Timer/Timer/Timel Remote Control, Delivery And Service Of Supply Airline With All Materials And Accessories Required For Said Installation. Upon Prior Technical Visit At The Installation Site; Product With Technical Assistance In The City Of Itumbiara-Go., Capacity Refrigeration 24,000 Btus, Delivery And Service Of Installation Of Air Conditioning With Supply Of All Materials And Accessories Required For Said Installation. Upon Prior Technical Visit At The Place Of Installation; Product With Technical Assistance In The City Of Itumbiara -Go., Capacity Refrigeration 36,000 Btus, Capacity Capacity 56,000 Btus, High Office Cabinet - Mdf, With 02 Doors, In Clay/ Light Gray (Catalago Shipping For Confirmation), Approximate Measurements Of 1, 80 Cm X 0, 45 Cm. Rounded Edges, With Pvc Coating, Rubberized Feet With Levels, Minimum Of 04 Shelves, Doors With Handles, Locks On The Doors, Delivery, Assembly And Warranty., 03/04/2025, Low Cabinet (Counter) - In Mdf Or Mdp, In Clay/Light Gray (Shipping Of Catalago For Color Confirmation), Approximate Measurements Of Color) Alt. 0, 74 Cm X 0, 45. 30Mm Thickened Mdp Top, 15Mm Body, Background, Rounded Edges, Minimum Of 02 Internal Shelves, Steel Cabinet 02 Doors: Approximate Measurements: Width X Height X Depth 900Mm X 1980Mm X 400Mm. The Cabinet Must Meet The Requirements Conferred On Product Quality, Manufactured In Accordance With Abnt Nbr 13961: 2010, Office Furniture - Cabinets - Classification And Physical And Dimensional Characteristics, Test Requirements And Methods. Observing The Provisions Of The Prescriptions Contained In Article 39, Viii, Of Law No. 8.078/90 (Consumer Protection Code), Produced In Accordance With The Descriptions Set Forth In This Reference Term, Unlawful Of Project Errors Or Addictions, Safeguarding Quality Standard And Manufacturing. Dimensions: (H) 1980 X (P) 400 X (L) 900 Mm - Dimensional Tolerances: +/- 5 Mm. General Characteristics: Constructed In Abnt 1008 Abnt 1020 Steel Sheets, According To Abnt Nbr 87: 2000 - Steel For Mechanical Construction - Designation And Chemical Composition. All Components Exempt From Burrs Or Living Corners, Welding By The Mig System Without Splashes Or Imperfections. Body And Upper Base/Hat: In Cold Rolled Steel Plate 1, 2 Mm, With Upper Welding Finish/Non -Apparent Body Hat, Making A Smooth “Single Piece” Tight Finish. Constituents Of The Body Welded In The Vertical Direction Of Each Side, Bottom With Central Reinforcement Inside. Symmetrically Distributed Racks Two To Two, Welded One On Each Side Of The Closet. Inside Of The Cabinet Body With A Suitable Device For Storing The Level Regulatory Pin. Doors: Two Pivoting Steel Doors #22 With Double Folding Throughout Its Perimeter, Internal Finish With The Closure Of The #22 Steel Pillow -Type Lock System, Strengthening Welded Inside, Three Internal Hinges On Each Door. Reinforcement To Soldiers At The Bottom Of The Trays. Metallic Knob, Non -Ferrous Alloy, With Chrome/Nickelled Finishing, Creamy Type Lock. Four -Pin Cylindrical Drum Lock And