Tenders Are Invited For Curning Of Poviat Road No. 1935N On The Krzywe - Cisy Section

1. Subject Of The Contract The Subject Of The Contract Is The Task Of Curning Of Poviat Road No. 1935N On The Section Krzywe - Cisy2. General Characteristics Of Works To Be Carried Out As Part Of The Task: As Part Of The Task Consisting Of The Renovation Of Poviat Road No. 1935N On The Section Krzywe - Cisy, The Following Material Scope Is Planned: - Equalizing The Existing Foundation With A Broken Aggregate With 0/31.5 Mm Mechanically Stabilized Layer With A Diameter. Gr. Up To 5 Cm, Taking Into Account The Required Horizontal And Vertical Declines At 2+835- 4+370 Km With A Length Of 1.535 Km And Road Width 4.0 M- Surface Consolidation Of Road Surfaces With Asphalt Emulsion And Basalt Grits Broken To Road Surfaces With Dimensions. 2-5 Mm In Km 2+835- 4+370 With A Length Of 1.535 Km And Road Width 4.0 M- Surface Consolidation Of Road Surfaces With Asphalt Emulsion And Grits Broken To Road Surfaces With Dimensions 5-11 Mm In Km 2+835 - 4+370 With A Length Of 1.535 Km And Road Width 4.0 M - Surface Consolidation Of Road Surfaces With Asphalt Emulsion And Grits Broken To Road Surfaces With Dimensions 11-16 Mm In Km 2+835- 4+370 With A Length Of 1.535 Km And Road Width 4.0 M A Detailed Description Of The Subject Of The Contract Are:- The Bill Of Quantities,- Detailed Technical Specifications. The Measure Of Works Is Sample. The Attached Bill Of Quantities (Annex 9 To Swz) Defines The Approximate Scope Of Works Intended For The Performance Of The Contract, Thus Facilitating Price Calculation. The Contractor Should Analyze The Attached Bill Of Quantities, Detailed Technical Specifications And Prepare A Price Offer Based On Its Own Analysis. If The Specification Of The Terms Of The Contract Would Indicate Trademarks, Patents Or Origin, Sources Or A Special Process That Characterizes The Products Or Services Provided By A Specific Contractor - The Contracting Authority, In Accordance With Art. 99 Paragraph 1 Point 5 Pzp Act, Allows The Offering Of Equivalent Materials Or Devices. Materials Or Devices From Specific Manufacturers Specify The Minimum Quality Parameters And Utility Features, Which The Materials Or Devices Offered By The Contractor Must Meet To Meet The Requirements Set By The Contracting Authority. Materials Or Devices From Specific Manufacturers Are Only A Qualitative Model Of The Subject Of The Contract. By The Term Minimum Quality Parameters And Utility Features, The Contracting Authority Understands The Requirements For Materials Or Devices Contained In Generally Available Sources, Catalogs, And Manufacturers Websites. Operating Examples Of The Manufacturers Names Is Only Aimed At Clarifying The Level Of Expectations Of The Employer In Relation To A Specific Solution. Using The Names Of Producers/Products Is Only An Exemplary Character. The Employer, Indicating The Designation Of A Specific Manufacturer (Supplier) Or A Specific Product When Describing The Subject Of The Contract, At The Same Time Allows Equivalent Products With Quality P