Tenders Are Invited For Modernization Of The Sports And Sports Field Of The Orlik At The Primary School In Żyrzyn

The Subject Of The Contract Is: Modernization Of The Orlik Sports And Sports Field At The Primary School In Żyrzyn Location: - Town: Żyrzyn, Commune Żyrzyn, Plot No. 342 Precinct: 0015 Żyrzyn, Registration Unit: 061411_2 Żyrzyn, Area Puławski, Voivodeship The Lublin Works Of Works Include: A) Replacement Of The Surface Of The Pitch With Artificial Grass By: • Dismantling The Existing Grass Liner With Utilization • Preparation Of The Substrate For A New Surface Made Of Artificial Grass • Making A New Surface Made Of Artificial Grass With The Following Parameters:  Fiber Type: Min. Two Types Of Fibers In One Bunny, Mix Monophil And Fibryl Height Of The Fiber: Min. 45 Mm, No More Than 50Mmm. Fiber Thickness (Monophil): Min. 395 Micronów Fiber Thickness (Fibril): Min. 95 Mikronów Dtex: Min. 20,500 Venues Of Fibers: Min. 120,000 Fibers/M2 Number Of Bunches/M2: Min. 8 661 # Resistance To Bundles From Aging: Min. 90 Nl Fiber Weight: Min. 1800Gr/M2 13 Total Surface Weight: Min. 3 100 Gr/M2 13 The Force Of Joined After Aging With Water: Min. 140N/100Mmm. Filling Of The Surface: Epdml Rubber Granules Minimum Thickness Of The Shockpad Flexible Mat: 10 Mm (Mat With Openwathis, Making The System Permeability Very Good). Elayer Mats Performed Directly On The Bokisko Surface Should Not Be Allowed To Comply With En 15330-1: 2013 Or Equivalent, Have Pzh Approvals For The Artificial Grass Surface And To Fill The Epdm, As Well As Have Research Reports Carried Out By A Specialist Laboratory Recommended By Fifa Regarding The Fifa On The Offered Surface System (Grass, Mat, Mat, Epdm Confirming The Compliance Of Its Parameters From Fifa Quality Concept For Football Turf (Edition 2015) For The Level Of Quality And Quality Pro And Confirming The Possession Of All Technical Parameters Not Worse Than Required (Available At Www.Fifa.Com). The Grass Surface Should Be Made As Described And The Requirements Described In Detail In The Attached Technical Documentation. Dedicated With Chemicals And Priming • Making A Layer Of Spray Polyurethane • Painting Linec) Renovation Of The Facilities Through: • Renovation Of The Cloakroom Rooms, Coaching Facilities And Magazine • Renovation Of Bathrooms • Roof Renovation • Roof Renovation • Thermal Insulation With The Facade) Replacement Of Lighting Luminaires For Led Luminaires E) Mesh Replacement For Footballs1. The Order Should Be Completed In Particular In Accordance With The Design Documentation, Technical Specification Of The Execution And Acceptance Of Works And Other Documents Constituting Annex 10 To Swz, Taking Into Account Swz Entries And The Contract (Annex 9 To Swz). 2. A Detailed Description Of The Subject Of The Contract Includes, In Particular: 1) Design Documentation, 2) Technical Specification Of Construction And Acceptance Of Construction Works. 3) Auxiliary Work. 3. The Subject Of The Contract Should Be Completed In Accordance With Applicable Law, In Particular The Act Of 7 July 1994 Construction Law (Journal Of Laws