Bids Are Invited For Price Registration For Hiring A Company Specializing In The Supply Of Furniture Diverse Intended For Schools Of The Municipal Education System, As Well As The Municipal Education Secretariat Of Governador Mangabeira-Ba, According To The Notice And Its Annexes

Approximate Dimensions 900 To 930 (L) X 400 To 450 (P) X1980 To 2000 (A) Mm. All Bookshelf Components Should Be Made Of Sae 1008 To 1012 Steel Sheets, With Columns In Reinforced Steel Sheet Sheet Sheet Reinforced Steel Plate. The Bookcase Should Be 04 Columns With Section In L, 35Mm Tabs Perforated In 50Mm Step For Sheight Adjustment Of The Shelves. Six (06) Removable Shelves That Enable Height Adjustment, Each Shelf Should Have Two Omega Reinforcements, The Front And Posterior Part Of Each Shelf Should Contain 3 Folds To Provide Greater Resistance And Lower Risk Of Accidents, Minimizing Cutting Edges. The Shelves Will Be Joined To The Columns Through 08 Hexagite Screws With Nuts. Sides And Background With Two Boosy Pairs Each X -Shaped, With Edges Attached To The Columns By Screws And Nuts. Metal Shoes Arranged Individually At The Bottom End Of Each Column, Avoiding Direct Steel Contact With The Floor. Anti-Ferruginous Treatment System By Tunnels The Spray Receiving A Protective Layer With At Least 3 Steps, Demographic And Phosphatization In Hot Iron Phosphate, Rinse At Room Temperature And Subsequent Application Of Inorganic Passivator Which Guarantees Layers Of Phosphate Distributed Uniformly Over Steel And Greater Integration Resistance. The Furniture Should Be Painted On Corona Continuous Equipment Where It Receives Application Of Hybrid Powder Paint (Epoxy-Political) By Electrostatic Adhesion Process With Textured Finish, With A Average Layer Of 50 Microns. Polymerization Should Occur In Greenhouses With The Piece Reaching A Minimum Of 200 ° C For A Period Of 10 Minutes, Or More, Thus Ensuring The Total Polymerization Of The Film, Greater Grip And Resistance To The End Finishing Of The Product. No Distortions, Crops In Manufacturing Or Use Of Plates By Means Of Amendments Will Be Allowed. Imperfections And Splash Of Welds Should Be Eliminated. The Bookshelf Must Be Supplied With, Cabinet Made Of Sae-1008 Steel Plate To Sae-1012 With Dimensions From 1980 To 2000 Height X800 To 900 Width From 400 To 450Mm Depth, Crystal Gray And Textured Finish, Consisting Of 02 Doors With Side Pivoting. The Right Door Has 5 Folds On The Left Side, Forming The Built -In Handle On The Door, The First With 8Mm Towards The Door In 180º, The Second With 14, 5Mm Towards The Door At 90º, The Third With 51, 5Mm Towards The Door At 90 ° And The Fifth With 17, 5M With Direction Into The Door At 90 °. In The Right Side Part Should Have 2 Folds, Upper And Bottom Of The Door, The First With 13Mm And The Second With 18Mm, Both Towards The Door At 90º. The Left Door Has 3 Folds On The Right Side, Forming The Right Door Stop, The First With 8Mm Towards The Door In 180º, The Second With 13, 5Mm Towards The Door At 90º And The Third With 18, 5Mm Towards The Door At 90º, In The Left Side Has 2 Folds, Both Towards The Door In 90º. Each Door Should Contain 2 Horizontal Omega Reinforcements In “C” By Welding Point At The Top And Bottom Of The Doors, For All Its Length, And A Vertical Omega Reinforcement On Each Door In The Central Part Throughout Its Extension, As Well As 3 Hinges In Suitable Places, Being