Tenders Are Invited For Delivery In The Form Of Operational Leasing With The Option Of Factory -Buying A New Self -Propeller Sweeper For Przedsiębiorstwo Usług Komunalnych Sp.Z O.O. In Zawiercie.

The Subject Of The Order Is The Purchase And Delivery Of A Brand New Self -Propeller With Parameters Not Worse Than: 1. The Requirements Of The General: 1) The Sweeper Delivered Must Be Factory New; 2) Year Of Production: 2025; 3) The Vehicle Should Come From Serial Production, Do Not Constitute A Prototype; 4) The Contractor Is Obliged To Deliver (At Its Own Cost And Risk) The Vehicle To The Headquarters Of The Contracting Authority: Zawiercie, Ul. Krzywa 3; 5) Along With The Delivery Of The Vehicle, The Contractor Is Obliged To Provide The Technical Specification Of The Subject Of The Contract; 6) Together With The Sweeper The Contractor Will Be Obliged To Provide: A) Warranty Book With A List Of Authorized Service Points, B) User Manual In Polish, C) Individual Equipment In Accordance With The Technical Specification. 2. Detailed Requirements: 1) Diesel Engine, Capacity 4000-5000 Cm3, With A Power Above 140 Hp Meeting The Requirements Of Exhaust Emissions According To Euro 6; 2) Wheelbase 1800-2000 Mm; 3) Double Cabin; 4) Air Conditioning System; 5) Own Weight Of The Sweeper 5000 Kg-6000 Kg; 6) Load Capacity Min. 6000 Kg; 7) On -Board Computer Informing Min. On Fuel Consumption, Possible Defects From The Menu In Polish Or Identification Using Pictograms/Symbols; 8) Sweeping Speed (Working) Minimum15 Km/H; 9) Speed ​​Regulation Using The Driving Lever In Sweeping Mode And Support Of The Sweeping Aggregate Integrated In The Same Driving Lever; 10) Transport Speed Of Maximum 25Km/H; 11) Vehicle Adapted For Traffic Right-Sided (Right-Hand Steering); 12) Adjustable Steering Column In Two Planes; 13) Drivers Seat With Pneumatic Resoring Set With Stepless Weight Adjustment, Passenger Seat With Mechanical Resoring; 14) Windows In The Floor For Observing The Skipping Aggregate And Suction/Nozzle; 15) 3-Point Passenger; 16) Noise -Damping Cabin Insulation; 17) Standard Varnish (Orange); 18) Cruise Control; 19) Supporting The Steering; 20) Hydrostatic Drive With Two Ranges/Modes (Sweeping+Transport); 21) The Sweeper Must Meet Pm 2.5 And Pm 10 Or Equivalent; 22) Led Daytime Running Lights; Turned Reverse Gear With A Circuit Breaker; 24) Ita For Filling The Tank With Water With A Length Of 5 To 10 M; 25) Fuel Tank Min. 100 Liters; 26) Adblue Tank Min. 14 Liters; 27) Automatic Central Lubrication System (For Hard -To -Reach Points); 28) Tank For A Minimum Capacity Of 5M3 Gross, Made Of Stainless Steel/Stainless Steel; 29) Rotational Speed Of Brushes Minimum 0-140 Rpm) Left And Right Mixed Plate Brush (Steel / Plastic) With A Diameter Of Min. 900Mm (Placed Under The Cabin), Hydraulically Lifted And Lowered, Independent Hydraulic Adjustment Of The Slope Of The Brush, Hydraulic Adjustable Pressure Of The Brush Pressure; 31) Third Mixed Brush (Steel / Plastic) At The Front Of The Switch With A Diameter Of Min. 900Mm (With Adjustable Cover), Additionally A Weed Removal Brush; 32) Hydraulic Brush Drive; 33) Width Of The Sweeping Surface At Least 2200Mm Using Two