Tenders Are Invited For Road-Repair Works-Rdw In Parczew: Renovation Of Voivodship Road No. 809 Przytoczno-Kierzkówka-Krasienin-Lublin, On The Episode Pimple Góra-Krasienin

Road-Repair Works-Rdw In Parczew: Renovation Of Voivodship Road No. 809 Przytoczno-Kierzkówka-Krasienin-Lublin, On The Episode Pimple Góra-Krasienin. The Subject Of The Contract Is: Renovation Of Voivodship Road No. 809 Przytoczno - Kierzkówka - Krasienin - Lublin, On The Episode Pryszczowa Góra - Krasienin, From Km 35+600 To Km 37+520, With A Length Of 1.920 Km. The Scope Of Works Includes, Among Others: A) Execution Of Measurement Works At Linear Earthworks With The Preparation Of A Geodetic As -Built Inventory; B) Making A Corrective Milling Of Bituminous Surface With A Thickness Of Up To 5 Cm; C) Making The Trough Under The Technological Band, D) Manual Profiling And Density Of The Substrate For Structural Layers; E) Making A Concrete Foundation Without Expansion Joints Under The Technological Band - Layer Thickness After 30 Cm Compaction; F) Making A Technological Band Made Of A Mineral And Bituminous Mixture Made Of Broken Aggregate With Asphalt Binder - Layer Thickness After A Thickening Of 10 Cm; G) Execution Of Mechanical Cleaning And Sprinkling With Cold Asphalt Emulsion Of The Foundation And Bituminous Surfaces; H) Execution Of The Existing Foundation With A Mineral And-Asphalt Mixture With Mechanical Built-In; I) Performing The Substrate With Geosiats; J) Making Pavement From Mineral And Bullshit Mixtures - Asphalt Binding Layer - Thickness After A Compaction Of 5 Cm; K) Making Surfaces Made Of Mineral And Bullshit Mixtures - Asphalt Cell Layer - Thickness After A Thickening Of 4 Cm; L) Making Surfaces Made Of Mineral And Bullshit Mixtures - Asphalt Abdominal Layer - Thickness After A Compaction Of 5 Cm; M) Strengthening Of Roadsides And Conventions From Broken Aggregate With A Grain Of 0-31.5 Mm, With A Thickness Of After Thickening 10 Cm; N) Moving Signs Or Signposts On The Post And Hectometer Signs. The Detailed Scope Of Works Is Included In The Project Documentation, The Temporary Traffic Organization Project, Technical Specifications For The Execution And Acceptance Of Construction Works, And In The Preface Of Works Constituting The Auxiliary Part Of The Determination Of The Number Of Works. The Bill Of Quantities Is Auxiliary. The Contractor Is Obliged To Carefully Check The Amount Of Works With The Design Documentation Before Submitting The Offer. Due To The Fact That The Work Contract Is A Flat -Rate Agreement, In The Event Of A Greater Amount Of Works In Any Position, This Will Not Be Considered Additional Works With The Request Of Additional Remuneration. Any Lack In The Pre -Work Of Works Or In The Formor Of The Offer Cost Estimate Certain Works Necessary To Be Carried Out On The Basis Of Project Documentation Does Not Release The Contractor From The Obligation To Perform Them On The Basis Of Project Documentation In The Contractual Price. The Contractor Has The Right To Correct The Number Of Works To The Quantity To The Quantity Of The Quantity According To Its Own Calculations On The Attitude Of Project Documentation.