Tenders Are Invited For Reconstruction Of Ul. Copernicus, Mickiewicz, And Rybacka In Międzyzdroje Consisting In Making A Bituminous Overlay.

The Subject Of The Order Is The Reconstruction Of The Streets: M. Kopernika, A. Mickiewicza, Rybacka With The Intersections Of Ul. Bohaterów In Warsaw And Gryf Pomorski With A Total Length Of 836 M (I.E. Ul. M. Kopernika: 253 M; Ul. Mickiewicza: 400 M, Ul. Rybacka: 183 M) And Widths From 4.50 To 6.0 M.2.1. The Scope Of Works Includes: 1) Execution Of The Expansion Layer On Ul. A. Mickiewicza (On The Section Of Approx. 215 M From The Building Of The Police Station, Ul. A. Mickiewicza 2 To The Intersection With Heroów Warsaw Street) On A Width Of 2.5 M (According To The Fig 4 Cm With Removal Of Material From Demolition At A Distance To 1 Km - 537.5 M2, B) Mechanical Purification Of Road Surfaces, C) Sprinkling Asphalt Of Road Surfaces, D) Surfaces Made Of Mineral And Bitumic Asphalt Mixtures - Rug - Approx. 537.50 M2 .2) Removal Of The Surface From The Stone Cube (5.5 M2) And Stone Stone (5.5 M2) And The Stone) Compensation From Asphalt Mineral And Bitumous Mixtures On Ul. Rybacka - 5.5M2 (Intersection With A. Mickiewicza Street) - (According To The Figure, Making The Expansion Layer And Removal Of The Surface From The Ankle) .3) Vertical Regulations Of The Wells For Water Valves, For Channel Hatches, For Street Sewage Boxes (30 Pcs), Including Replacement Of 3 Channel Hatching. Collapse,- Milling Of Unevenness,- Mechanical Cleaning Of The Existing Surface,- Sprinkling Asphalt Of Road Surfaces. Conducting Along The Entire Width Of The Streets: M. Kopernika, A. Mickiewicza, Rybacka With The Intersections Of Ul. Heroes In Warsaw And The Pomeranian Gryf Pavement Of A Cold Seal Road With A Thickness Of 2 Cm Thick (The Estimated Range Of The Surface Of The Surface Is About 4,510.00 M2) .5) Recreation Of Horizontal Marking With Chlorocham Paint - An Estimated Value Of Approx. 100.33 M2. 2.2. In Terms Of Requirements For Asphalt Binder Unit. The Temperature Range Of The Use Of Asphalt Emulsion For The Production Of A Mineral And Emulsion Mixture And Its Built -In Is 10 ° C - 35 ° C.2.3. As Part Of This Contract, The Contractor Will Be Obliged To:- Implement All Works In Accordance With Applicable Regulations, Applicable Standards, Technical Conditions, Technical Knowledge And Health And Safety Regulations;- Responsibility From The Consequences And For The Results Of Activities In The Field Of: A) Organization And Service; B) Securing The Interests Of Third Parties; C) Environmental Protection; D) Work Safety And Hygiene Conditions; E) Organization And Maintaining Works; F) Road And Pedestrian Safety; G) Protection Of Property Related To Conducting Works. The Contractor Bears Full Responsibility For Maintaining The Marking And Securing The Robot During Their Performance. The Factory And User/Owners Fact And Undertakes To Repair Damage According To The Guidelines And In Consultation With The User/Owner. - During The Implementation Of The Work, The Contractor Will Maintain The Area Of ​​Performing Works In A State Enabling Travel, Remove And Store All Auxili