Bids Are Invited For Price Registration For Any Acquisition Of Office Furniture, According To Conditions And Requirements Established In Annex I - Reference Term.

Steel Cabinet With 2 Portascharacteristic - Made Of Steel Sheet #26 (0, 45) Normalized Cold Laminated On The Sides, In The Bottom And Doors. Upper Hat Made Of Steel Plate With 3 Perpendicular Folds And The 1St To 25Mm With 90º, The 2Nd To 25Mm With 90º, The Third At 15Mm With 90º And Ends With 10Mm. Lower Plate Made Of Steel Plate # 26 2 Perpendicular Folds Being The 1St To 20Mm With 90º, The 2Nd To 45Mm With 90º And Ends With 15Mm And With Lever System For Locking The Sides. Colorful Overlapping (Color To Choose) Doors With Left And Straightforward Measurements Of 355Mm (L) X1540mm (A). Hinged -Articulated Door 30Mm High On Plate #20 (0.90Mm) So, Quota Me- Epp - Item 1 - Steel Cabinet With 2 Portascarhacteristics - Made Of Steel Sheet #26 (0, The 2Nd To 90º And Ends With 15Mm And With Leverage For The Sides. Left And Direct Measurements Of 355Mm (L) X1540mm (A). Holder -Articulated Door 30Mm High, Two -Door 1600X500mm. Unique And Inseparable Body, With Finishing Across The Perimeter On Pvc 1, 0Mm Tape With Exact Color To The Top, With Impact And Thermally Stable Resistance. 8X10mm Depth In All Its Length Between 16, Quota Me -Epp - Item 3 - Cabinet Two Doors 1600X800x500mm. Meta Made Of 25Mm -Thick Wooden Sheet With Textured Film, With 8X10mm Profounds In All Its Extension, Cota Me- Epp - File Disthots. 25 Mm Thick Mdf Top, Coated On Both Sides Of Low Pressure Bp Melâminic Laminate. It Has In All Its Contour Edge Trim Finished By The Hotmelt Process. Sides, Drawers Front, Base And Background Made Of 15 Mm Thick, Coated On Both Sides Of Low Pressure Bp Melâminic Laminate. It Has In Its Contour Border Ribbon Finished By The Hot-Sem Process. Drawer For Suspended Folder Files With Two Galvanized Rods. Background Made Of 2, 8 Mm Thick Sheet, Covered In One Of The Uv Painting Faces. Its Slides Are Telescopic With 350Mm Opening In Two, 21/03/2025, File Made Of Sae-1008 Steel Plate To Sae1012, Predominantly In Plate #26 With Dimensions Of 1330X470x685 Mm (Axlxp), Textured Finish, Internal Reinforcements, Vertical Boat Format In Each Structure, Welded In Each Structure Lateral, 4 Drawers With A Capacity Of At Least 25 Kg Each, Telescopic Rail Sliding System And Steel Bearing, Handles Fixed In The Drawers Own Structure, For Structural Purposes, Not Being Able To Occupy The Upper Or Bottom Ends, Side Rods To Support Folders, Tag Holders Stamped On The Steel Structure Itself, Round Lock With 2 Keys. In The 4 Lower Ends Of The Base Of The File Should Be S, Mem -Epp Quota - Item 7 - File Made Of Sae -1008 Steel Plate To Sae1012, Closed