Tenders Are Invited For Deep Energy Modernization Of The Village Common Room Building In Żukowo

1. Deep Energy Modernization Of The Village Common Room Building In Żukowo Located On The Plot No. Rd. 51 Precinct: Żukowo, Naruszewo Commune. 2. The Subject Of The Task Is Thermomodernization Of The Building Of The Village Common Room In Żuków, Commune Naruszewo. Renovation Works Will Consist Of Replacement Of Window Joinery, Insulation Of External Walls And The Ceiling. There Is Also A Replacement Of Heat Source, Modernization Of Ventilation, Replacement Of Lighting Fittings And Implementation Of Lightning Protection Installations, And Renovation Works - Replacement Of Roofing, Sheet Metal Treatment, Separation Of The Utility Room, Renovation Of External Stairs And Making A Band Around The Building. 3. Description Of The Building: 1) Traditional Building, 2) Concrete Foundations, 3) Load-Bearing And Partition Walls Made Of Full Brick, 4) Concrete Ceilings, 5) A Gable Roof With Corrugated Asbestos Covering, 6) Window And Door Joinery With Pvc, 7) Building Equipped With Water And Sewage And Electrical Installations, 8). 80 M2,9) Gross Volume - About 750 M3,10) Building Height Approx. 5, 97 M (At The Lowest Point Of The Area), 11) The Number Of Floors - 1.4. Works In The Architectural Industry: 1) Replacement Of Window Joinery2) Replacement Of Roofing From Eternit To Sheet Metal, 3) Insulation Of The Ceiling Above The Ground Floor Mineral Wool, 4) Insulation Of External Walls With Polystyrene And Walls Below The Level Of Styrodure Ground, 5) Replacement Of Gutters And Drain Pipes, 6) Remedy Of The Facade, 7) Renovation Of External Stairs, 7) Replacing The Aggregate Band. 5. Works In The Sanitary Industry 1) Central Heating Installation - Heat Supply Will Be Provided Via A Heat Pump. Installation Of Central Heating In The Radiator, Two -Pipe System, With The Upper And Lower Chapter On The Ground Floor Of The Building, 2) Implementation Of A Ventilation System - A Mechanical Ventilation System Was Designed For The Main Hall. 6. Robots In The Electronics Industry: 1) Replacement And Supplementation With Energy-Saving Led Fixtures, 2) Installation Of Emergency And Avoid Lighting Fixtures, 3) Installation Of Power Supply For The Sanitary Industry Electrical Devices (Heat Pump, Recursa Of Exhaust Fans), 4) Lightning Protection Installation, 5) Protection From Paralysis.