Tenders Are Invited For Renovation And Modernization At The Independent Public Voivodship Specialist Hospital In Chełm

The Subject Of The Contract Is Construction Work- Renovation At The Independent Public Provincial Specialist Hospital In Chełm, Consisting Of: 1) Renovation Of The Water And Sewage System In The Administrative Building, 2) Renovation Of The Sewage System In The Building Of The Hospital Pavilion B, 3) Replacement Of Damaged Water Valves And Corroded Water Pipes Section 1F, 1B, 1A, 1C, 1H, 1G, 1 E. Aparter Description Of The Subject Of The Contract Can Be Found In The Technical Documentation, Constituting Annex 4 To Swz, Which Consists Of: 1) Technical Documentation, 2) Technical Specification Of The Execution And Receipt Of Construction Works (Stwior), 3) The Bill Of Quantities. Attention To The Fact That The Remuneration Of The Contractor Will Be A Flat -Rate Nature, The Contractor Should Be Based On The Scope Indicated In The Technical Documentation. The Bill Of Quantities Attached To Swz Is An Auxiliary, Which Is Emphasized By § 4 Para. 3 Of The Regulation Of The Minister Of Development And Technology Of December 20, 2021 On A Detailed Scope And Form Of Project Documentation, Technical Specifications For The Execution And Acceptance Of Construction Works As Well As A Functional And Functional Program. The Contractor Is Obliged To Carefully Check The Amount Of Works With Technical Documentation. Due To The Fact That The Work Contract Is A Flat -Rate Agreement In The Event Of A Greater Amount Of Works During The Works In Any Predecessor Position, It Will Not Be Able To Be Considered Additional Works With An Additional Remuneration. Any Lack In The Pre -Emptive Of Works And Works Necessary To Be Carried Out In The Technical Documentation Does Not Release The Contractor From The Obligation To Perform Them On The Basis Of Technical Documentation In The Contractual Price. Equivalent To Resolutions. In Each Case Of Use In The Description Of The Subject Of The Order Of Norms, Technical Assessments, Technical Specifications And Technical Reference Systems Referred To In Art. 101 Para. 1 Point 2 And Para. 3 Of The Public Procurement Law, The Contractor Should Assume That Such As Accompanied By The Words Or Equivalent. In The Case Of Use In The Project Documentation References To Standards, European Technical Assessments, Approval, Technical Specifications And Technical Reference Systems, The Employer Allows Equivalent Solutions. When Analyzing The Documentation, The Contractor Should Assume That Each Reference Used In The Documentation Is Accompanied By A Or Equivalent Word. In The Event That Trademarks Have Been Used In The Documentation Or Technical Specification And Acceptance Of Construction Works, It Means That They Are Given, For Example And Specify The Minimum Expected Quality Parameters And The Required Standard. The Contractor May Apply Equivalent Materials Or Devices, But With Technical And Quality Parameters Similar Or Better, The Use Of Which Will In No Way Negatively Affect The Proper Functioning Of The Solutions Adopted In The Project Docum