Request For Quotation Spare Parts For Urb

Cuffs 85-95-6 Ush Nbr Rubber, Spring Ball Valve Nb 32 -02-85, Piston Rod Nb 32-02-501, Translators For Drill Columns Are Designed To Connect Parts Of The Drill Column And Attach The Tools Used For Drilling Wells To It. Translators For Drill Columns Are Made The Following Types: P - Transitional; M - Coupl; N - Nipple. Internal Size 66 Mm/Bun 117 Steel, In The Molecule Of The Tsitter-Ion Polymer Coagulant Fa367, A Linear Macromolecule Of A Polymer Of A Cationic Group, A White Or Gray-Yellow Powder. It Is Mainly Used To Inhibit The Detritus Dispersion And Increase The Viscosity Of The Drilling Fluid, Has A Sufficiently Strong Ability To Suppress Enveloping, In This Regard, It Has Strong Properties Of Contamination Resistance, Is Easily Cleaned Of Stone Flour, Can Reduce The Content Of Submicrons In The System, Increase The Rate Of Drilling And Protect The Fertile Layer. Often Used In Combination With Lower Viscosity Of A New Type Of Xy-27, Can Significantly Reduce The Cost Of Drilling Fluid, Increase The Overall Economic Benefit., Bullet Tap Universal Mbu 32-73, Translators For Drill Columns Are Designed To Connect Parts Of The Drill Column And Attach The Tools Used For Drilling Wells To It. Translators For Drill Columns Are Made The Following Types: P - Transitional; M - Coupl; N - Nipples. Interior Size 86 Mm/Nar 117 Steel, Wa-C-C Short, But A Simple But Very Effective And Extremely Necessary Auxiliary Manual Mechanical Tool Used During Drilling Of Gas Or Oil Wells When Installing Or Dismantling The Pipe. The Wa-C Series Model Is Directly Used To Work With Pipes From 3 1/2 To 15 5/8 Inches, That Is, 88.9 ... 396.9 Mm., Bullet Tap Universal Mbu 74-120, Translators For Drill Columns Are Designed To Connect Parts Of The Drill Column And Attach The Tools Used For Drilling Wells To It. Translators For Drill Columns Are Made The Following Types: P - Transitional; M - Coupl; N - Nipples. Translators For Drill Columns Are Designed To Connect Parts Of The Drill Column And Attach The Tools Used For Drilling Wells To It. Translators For Drill Columns Are Made The Following Types: P - Transitional; M - Coupl; N - Nipple. Internal Size 50 Mm/Nar 73 Steel, Business Sleeve Cylinder Size F-120 Mm, Nb-32, The Advantages Of The Chain Pipe Reed Wa36: Used For Products Of Any Shape Provides Safe, Reliable And High Torque Double Reverse (Therefore, More Economical) Sponges Provide Work As With A Ratchet Mechanism, In Any Direction Without The Need To Remove The Chain Key From The Pipe: The Direction Can Be Changed Without Removing The Chain The Unique Handle And The Design Of The Sponge Allow The User To Leave The Key On The Pipe During The Placement Of The Chain Into The Groove. Article 02070 Model Reed Wa36 Pipe Diameter 21 - 127 Mm 1/2 - 5 Maximum Pipes Diameter 180 Mm (7.1 ) Ground Load Of The Chain 6.51 Kg Length 832 Mm (33 ) Weight 7.5 Kg, Kshs Hinged Key Diameter 63.5, Spindle Rotator 2D 146000, Size 85 Mm, Length Up To 100 Cm, Characteristics: P89x9n Diameter, Mm 89 Wall Thickness, Mm 9, Z-73 Z-73, Mass 42-48 Kg, Manometer Mp4u 0-40Mpa, Nb-32, Piston Size F -120Mm, Nb -32, The Diaphragm Ks-1001-00-000-1, The Remote Cylinder Set Of Lifting The Mast, Assembled Urb-2A-2, Breeded Drill Pipes (Ubt) Are Designed To Increase The Stiffness And Increase The Mass Of The Lower Part Of The Drill Column, Through Which The Load On The Loot Is Created. Scroll 146 Mm, Length 4 M, Thread 117 Mm