Tenders Are Invited For Wall-Covering Work-Acoustic Panels As Part Of The Expansion Of The Mcs Empelde

Wall-Covering Work-Acoustic Panels As Part Of The Expansion Of The Mcs Empelde. Acoustic Panel 6.50 X 1.20 M Acoustic Panel (Wall Absorber) As A Decorative, Acoustically Highly Effective Broadband Absorber With Textile Fabric Covering For Regulating The Room Acoustics And Improvement Of The Audience According To Din 18041, Alternatively Also Usable As Follows, Deliver And Assemble As Follows: Akustic Minimum Requirements According To A Test Certificate (Checked As An Overall Element Din En Iso 354): Rated Absorption Degree Α 1.0 Additional Evaluation Αp At 125Hz>/= 0.56 System Structure: Self -Supporting, Shaping, Connection Stiff Frame Construction Made Of Aluminum Profiles, Edges Of Accident -Proof Min. 2 Mm Rounded/Fasted, Construction Depth Total 89 Mm, Bounding In The Internal Polyester Or More. Pet Fiber, Low In Pollutants, Flame-Retardant, B1 According To Din 4102, Thickness 80 Mm, Surface: Textile Covering Made Of Acoustic Fabric, 95 % New Wool, 5 % Polyamide, In Felt-Like Appearance, Min. 5 Daring In Green And Gray Spectrum To Choose From, Up To 4 Per Single Element, From The Manufacturers Color, Weight 400 G/M², Period Low, Covering Around The Side Surfaces Of The Frame Construction Of The Absorber And Securing At The Back. Frame Profile With Shadow Joint To The Wall. Dimensions Total Element Per Room: Width: 6.50 M High: 1.20 M Area: 7.80 M² Dimensions Single Element: Total Element Divided Up To Four Individual Elements In Different Widths And Divisions Width: 0.75 To 2.50 M Height: 1.20M Assembly: On Plastered Solid Walls Or Double -Tied Drying Walls, Covered Fastening, Bottom Edge Above Prefabricated Floor Billing Per Piece Of The Overall Element Further Also Enclosed Planning Documents And Example Photo From A Previous Object. Distribution And Colors Are Only Shown Here. The Determination Is Made After Sampling And Can Differ From Room To Space. Planning Manufacture: Acoustics/And/Space Model/Type: Artsorber Broadband 89 Or Glw. Due To The Spatial, Usage -Specific And Acoustic Conditions, It Was Necessary To Take A Manufacture Of The Planning As A Basis For Compliance With The Tolerance Boundaries Of Din 18041. However, The Bidder Is Free To Offer An Equivalent Product. This May Differ In The Strength Of The Absorber Or The Entire Element To +/- 20 Mm. However, At Least The Aforementioned Technical And Acoustic Properties Must Meet. These Are To Be Proven By Test Certificates.