Request For Quotation Linear Reinforcement (Ear, Earring, In Enchanting, Stretch)

The Clamp Of The Tension Nb-2-6, Designed To Attach Aluminum, Steel-Aluminum And Copper Wires To The Stretch Insulating Pendants Of Anchor-Integrated Supports. Mark Wires: A95, A120, A150, M95, M120, As70/11, Ac95/16, Ac120/19, As120/27, As150/19, As150/24. The Minimum Destructive Load, Kn-57. Supplier Provides A Quality Certificate, The Sps-7-16 Earring Is Designed To Ensure The Hinge Connection Of The Chain Type Of Hack Of The Suspension Insulator Or The Ears With The Kgp-7-3 Attachment Nodes Or Traverses On The Overhead Lines Of 6-110 Kv. It Has A Rounding Of The Edge To Ensure Mobility In Two Planes When Connecting To The U-Shaped Bolts. The Earring Is Made Of Steel With Subsequent Hot Galvanizing, A Minimum Destructive Load, Kn-70. Supplier Provides A Quality Certificate, The Ear Of U1-7-16 To Connect The Pendant Isolator Or Earrings With Another Linear Reinforcement, The Standard For Compliance With Tu 349-111-00111120-95, Gost 27396-93, Gost 11359-75. Supplier Provides A Quality Certificate, The Clamp Supporting Pgn-3-5, For Fastening Wires And Lightning-Protective Cables To Insulating Pendants, As Well As For Fastening Lightning Cables Directly To Intermediate Supports. The Boat And The Clip Of The Clampable Are Made Of Aluminum Alloys. The Diameter Of Wires And Ropes: 13.5-19.6 Mm. Minimum Destructive Load, Kn-30. Supplier Provides A Quality Certificate