Bids Are Invited For Acquisition Of Containers For The Storage Of Urban Solid Waste Generated In The Municipality Of Pombal/Pb

240 -Liter European -Type Plastic Container With Wheels And Lid. Acquisition Of Hdpe Containers With A Capacity Of 240 Liters With Metal Axle And 2 Wheels. Minimum General Characteristics: 240-Liter European-Type Plastic Container With Two Wheels- Should Have Handles To Pull, Push And Maneuver The Container, Which Allow The Operator To Hold Firmly With Both Hands. They Must Have A Minimum Height Of 800 Mm In A Sloping Position (Center Of Gravity Above The Wheel Axis). Songs: All Corners That Can Be Used To Maneuver Must Be Rounded, So That No One Can Be Injured, With Radius Less Than 1, 4 Mm. - Mobile Plastic Container To Be Defined By The Administration Of The Municipal Secretariat Of Works, Transport And Infrastructure Of The Municipality - Dimensions: It Must Comply With Table 3 Of The Abnt Nbr 15.911-2 Technical Standard. - Markings: The Containers Body Must Be Permanently Marked, Readable And In A Visible Place With At Least The Following Information: - Identification Of The Manufacturer; Month And Year Of Manufacture; Identification Symbol Of Raw Material According To Abnt Nbr 13230; - Number Of This Part Of The Standard; Nominal Volume Expressed In Liters; - Total Load Permitted Expressed In Kilograms; - Profile: It Should Allow The Container To Be Immobilized In The Loading Position.- Wheels: Two With Internal Polypropylene Rims And Outdoor Rubber Rims, Installed On A Massive Sturdy Metallic Material With Anti-Corrosive Treatment. - Surface: Cannot Have Damage, Cracks, Moves, Large Marks. It Must Be Smooth And Free From Any Strange Objects Or Imperfections, As Well As Living And Pointed Corners. Type: European - Volume: The Total Internal Space Of The Container When The Lid Is Closed Will Be 240 (Two Hundred And Forty) Liters. 15911-3/4 By Certificate Issued By An Ocp - Product Certificate Bodies And Report Of All Tests Contained In The Abnt Or With Scope Accredited By Inmetro. It Should Be Manufactured With High Density Polyethylene (Hdpe), By Injection Process And Resistant To The Action Of Ultraviolet Rays (Uv Protection), With Smooth Surface And Free From Cracks, Imperfections, Living And Pointed Singing. It Must Have A Drain Device For Liquid Flow, Have Resources To Set Up The Casters Plate Without Drilling The Container And Devices That Enable The Efficient And Secure Elevation (Tilting) Operation. They Are: Lateral Receptor (Type A) Munnhão: Pair Of Axles Located On The Sides Of The Container; Front Receptor (Type B): Grooves On The Front Of The Container For Fitting The Combs. Have 4 Casters With Steel Support With Anti -Corrosion Treatment, With 200Mm Dimension And 360º Rotation, Coated With Solid Rubber, Two Casters With Individual Brake System. With Adhesive For Awareness Message. Minimum Warranty Against Defects Or Defects Of 12 Months From The Date Of Effective Receipt. Dimensions: Capacity: 950 To 1100 Liters. Total Height: Maximum Of 1470 Mm Width With Bunnion: 1360 Mm To 1380 Mm Weight Of The Empty Container, At Least 45Kg Color: Blue 12 Months Warranty, Including Color.