Bids Are Invited For Acquisition Of Furniture

(Id134362) Table For Refinement, Table 6 (Six) Places, Consisting Of Modular Plastic Tops Based On Natural Abs, Formed By 3 Modules That Are Fixed By The Structure By Fitting, 4 Fits On The Sides Of The Table (2 On Each Side) And 3 Central Fittings By Module And 4 Bolts Per Module; Table Structure: Made Of 20X40mm Section Pipe With 1, 2Mm, Consisting Of 3 Platters And 2 Headwaters. In The Four Corners Of The Frame, At The Bottom There Should Be A 2Pol Tube Connection With 2, 25Mm, Where The Tables Of The Table Will Be Mounted; Sheep Tube Legs 1.1/2 Pol X 0, 9Mm Wall; Height -Adjustable Shoe For Table Leveling, Made Of Polypropylene; Seat Structure: Made Of Polypropylene, Approximate Dimensions Of 465Mm (L) X 415Mm (P), 5Mm Thick, And Rounded Corners; Seat Height To The 449Mm Floor Approximately; Pes Of Polypropylene Stringers; Approximate Dimensions Table (Cxlxa): 1860 X 820 X 760Mm; The Wagon Set Should Allow 02 Arrangements Of 03 Seats, Being Consisting Of Injected Pes Injected Into Polypropylene Copoline, Two Traveles Of Rectangular Pipe 20X40mm Thickness 1, Sets Of Injected Polypropylene Pipe Copoline, Occupied Dimensions Should Be Approximately 460Mm (A) X 518Mm (L), Total Width, And And And And 1755Mm Length, Present A Space Between Approximately 101Mm Seats; Additional Characteristics: All Metal Pieces That Make Up The Table Should Receive Anti -Corrosive Treatment And Epoxy Paint Paint., (Id134364) Table For Refinement, Table, 8 (Eight) Places, Consisting Of Modular Plastic Tops, Formed By 4 Modules That Fix The Structure By Fittings, 4 Of The Table Sides (2) And 4 Central Fittings By Module And 4 Bolts By Module; Table Structure: Made Of 20X40mm Sectioning Pipe With 1, Consisting Of 3 Platters And 2 Headwaters In The Four Corners Of The Frame; At The Bottom Of It There Should Be A 2Pol Pipe Cone With 2, 25Mm Where The Peses Of The Tables Will Be Mounted; Sheep Tube Legs, 1.1/2Pol X 0, 9Mm Wall; Shoe With Height Adjustment For Table Leveling, Made Of Polypropylene; Seat Structure: Made Of Copoline Polypropylene, Approximate Dimensions Of 465Mm (L), 415Mm (P) 5Mm Thick And Rounded Corners; Height Of The Seat Until The Floor Should Be Approximately 449Mm; Pes Of Polypropylene Stringers; Table Dimensions (Cxlxa): 2480 X 820 X 760Mm ± 2%; The Wagon Set Should Allow 02 Arrangements Of 04 Places Consisting Of Injected Polypropylene Copoline; Two 20X40mm Rectangular Stares Tubes Thickness 1, 2Mm; Settlement Sets In Tube Seat; Injected Polypropylene Copolimo Seats. The Occupied Dimensions Of Approximately: 460Mm (A) 518Mm (L) (L) Total, And 2325Mm (Comp.); Present Space Between Approximately 101Mm Seats; Additional Characteristics: All Metal Pieces That Compose The Table Should Receive Anti -Corrosion Treatment And Paint In Epoxy Ink., (Id134365) Rectangular Table, Type: Linear; With 2 Fixed Drawers; Top: Linear Surface; Dimensions (Axlxp): 740 X 1210 X 615Mm ± 2%; Material: Mdp Bp 15Mm Thick; 15Mm Bp Mdp Drawer Measuring: 208Mm (C) X 380Mm (L) ± 2%; Yale Type Cylindrical Lock With Keys, Cylinder And Tongue; High -Impact Polyethylene Capurs; 15Mm Bp Mdp Panel; Structure: Pe Ti