T-Shirt: Made In Half Mesh Pv 65% Polyester 35% Viscose Tolerance 3 Percentage Points +/-, Grammature 170G/M² 5% +/--Navy Blue Pantone 19-3921 Tpx. Cutting: At The Front At Shoulder Height Should Contain A Clipping In Half Pv Mesh 65% Polyester 35% Viscose Tolerance 3 Percentage Points +/-, 170G/M² Tolerance 5% +/- White Color, For Size 10 With 50Mm And For The Other Sizes Proportionally. Collar: Made In Ribana 1X1 Composition 64% Polyester 34% Viscose 2% Elastane Tolerance 3 Points +/- For Fibers And Elastane Accepted 1, 6% To 2, 4%, 240G/M² Tolerance 5% +/-, Navy Color Pantone 19-3921 Tpx, Applied To Better Quality And Uniformity Of Coverage Machine Wide 20Mm Ended Gauge With Overlocking Machine. Bar Sheet: The Hem Of The Bar Should Be Made In A 20Mm Wide -Ended Gauge -Ended Coverage Machine. Cuffs: The Fists Sheath Should Be Made In A 20Mm -Finished Wide -Wide Gauge -Bito -Gauge Machine With Overlocking Machine. Silkscreen: On The Front Side Of The Left Side Of The Chest Height Should Be Stamped The Coat Of Arms Of The Municipality Of Mamborê - Pr With Their Proper Colors, According To The Following Image And Measurements: At The Top Of The Back Should Be Stamped To The Coat Of Arms Of The Municipal Education Secretariat - Pr With Their Proper Colors, According To The Image And Measurements Below: All Sizes: Length 23Cm X Proportionate, The Closure Of The Sides, The Side Of The Sides, The Side Of The Side, The Closing Of The Side, The Closure Of The Side, The Closure Of The Sides, The Closing Of The Side, The Closure Of The Sides, The Closing Of The Sides, The Closure Of The Sides, The Closing Of The Sides, The Closure Of The Sides. Shoulders, Sleeves And Clippings Should Be Done On An Overlock Machine, To Make This Piece It Should Be Used 100% Polyester Line, N ° 120, In The Color Of The Fabric. Etiquette: The Identification Label Should Be White Fabric, Posted Permanently And Indelible On The Inside Of Each Piece, In The Rear Center Of The Collar. The Typographic Characters Of The Indicatives In Black Color Should Be Uniform And Inform The Corporate Name, ..., Gray Pants: Material In Brim Made Of Cotton And High Quality Synthetic Fiber, Ensuring Resistance And Durability. White Color. Material Resistant To Tears And Abrasions, Suitable For Use In Operating And Industrial Environments. Product Characteristics: Elastic Model At The Waist, Without Pocket. Need To Provide Sample And Table Of Measurements., Apron Beat: Material In Oxford 100% Polyester Fabric Ensuring Resistance And Durability. White Color. Material Resistant To Tears And Abrasions, Suitable For Use In Operating And Industrial Environments. Product Characteristics: Model Beat, Without Pocket With Straps For Adjustments To The Sides. Reinforced Seams To The Full Extent To Ensure Greater Durability., Safety Shoe: Made Of Eva (Ethil Vinyl Acetate), Super Light, Non -Toxic And High Resistance Material. White Color, Beige Sole. Protects The Users Feet Against Light Risks, Abrasive And Abrasive Agents, Against Moisture From Operations With Water Use, Thermal Agents (Cold) And Against Risks Of Chemical Origin. Electrical Insulating Shoes, With Energy Absorption In The Heel Area (Heel), With Non -Slip Sole Containing Grooves That Increase Grip On Smooth And Wet Surfaces. Sliding Resistance On Contaminated Ceramic Flooring With Sodium Sulfate (Detergent) And Steel Floor Contaminated With Glycerol (Src). Varied Numeractions According To The
