Bids Are Invited For Hiring Of Specialized Company (S), In Supply Services Related To The Drinking Water Supply System, From Maintenance In Distribution Networks To Maintenance On Water Easels, Water Collection, Cutting And Reconnection In Real Estate, And Other Services That Are Of Fundamental Importance For The Full Progress Of The Supply System On The Division Of Saatu (Tupãssi Water Supply Service).

Water Supply Cut On The Easel: Check The Data Contained In The Interruption Report Report With The Data In The Field: Hydrometer Address And Number; Inform The Customer About The Execution Of The Service; Close The Easel Pressure Record; Make Sure That Water Flow Was Interrupted; Check If The Seal Was Violated; Remove Anterior And Posterior Nuts And Tubes To The Water Meter And Check If There Are No Objects Within It That May Cause Submission; Remove The Pressure Record And Introduce With Specific Key To The Eastern Foot, The Shutter Device Near The Lower Elbow To Interrupt The Water Flow; Check The Watertightness Of The Connection; Replace The Pressure Record, Elbow, Nut, Tube, Garrison; Place The Seal; Collect All Material Taken From The Easel And Clean The Place; Fill In The Data In The Report: Date, Functional Identification And Hydrometer Reading. In Case Of Impediment, Justify The Non -Suspension, As Shown In The Footer Of The Statement. Deliver Customer Suspension Statement And Guide You On The Procedure For Payment And Reconnection. In Cases Of Water Connections Made On The Ride, In Standard Box: Remove The Nut And Tube Prior To The Water Meter, Check If There Are No Objects Within This That May Cause Submission. Introduce The Shutter Into The Tube With A Specific Key To Interrupt The Water Flow.Mc Tiger: Water Cut Is Performed Without Disassembly And Removal Of The Hydrometer: The Registration With Retention Valve Is Fully Closing And The Existing Seals Are Broken In The Upper Parts Of The Slight Impact Manoplas. Then Remove The Remaining Fragments Of The Seals. The Gauntlet, The Fixation Nut And The Castle Is Removed. The Shutter Is Threaded Until The Leak Ceases. The Gauntlet Is Removed From The Registration Fastening Nut With Retention Valve, Remove The Castle, Along With The Plug, Noting That The Obturator Will Be Inside The Record.Obs: ..., Reconnection Of Water Supply On The Easel: Check The Data In Statement To The Data On The Field: Address And Hydrometer Number; Inform The Customer About The Execution Of The Service; Close The Easel Pressure Record; Remove The Seal; Remove The Nut, Tube And Elbow Prior To The Hydrometer And The Pressure Record; Remove The Cutting Device (Shutter) With Specific Key; Replace The Pressure Record, Nut And Garrison; Tighten The Unions; Open The Pressure Record To Verify The Release Of Water Flow; Observe If There Are No Leaks In The Connections. Close The Record; Place The Seal; Collect All Material Taken From The Easel And Clean The Place; Fill In The Rereading Form With Data: Date And Time Of Reconnection, Hydrometer Reading, Service Code, Materials Used And Functional Identity Of The Employee. A Tiger: The Existing Seals Are Broken In The Upper Parts Of The Gauntlets With Slight Impact. The Remaining Fragments Of The Seal Are Removed. The Gauntlet, Fixation Nut, And Registration Castle With Retention Valve Is Removed. The Castle Is Installed Along With The Plug And Thread The Fixation Nut. The Gauntlet, Fixation Nut And The Blind Castle Of The Measurement Device Is Removed. The Shutter Is Unloved To The Starting Position. The Castle And Fastening Nut Is Reinstalled, Then The Handles Are Fixed And The New Seals Are Install