Bids Are Invited For Acquisition Of 01 Waste Separation Treadmill, 01 Waste Lift Treadmill, 01 Ramp -Scanning Press, 01 Electronic Scale With Ramp And 01 Motorized Forklift For The Municipality Of Mamborê/Pr.

Minimum Waste Separation Treadmill: 10, 50M; In Metal Structure With Anti -Corrosion Coating; Equipped With An Electrical Engine Of At Least 1Kw; Product Dimensions: 1010Mmx1380mmx10500mm (Height X Width X Length); Useful Width Of Screening In The Transporter Belt: 1000Mmx10500mm; With Side Protection In Rubber To Prevent Waste Accumulation In The Carrier Belt; Flat Base Steel Plate For Landslide Of The Belt; System Of Variation In The Velocity Of The Transport Belt, Through Frequency Inverter And Potentiometer Controlling The Advance Of The Treadmill By Determining The Speed For The Operation Of 0 To 8 Meters Per Minute;, Residue Lift Treadmill Of Minimum Compliance Of 6,000Mm And Maximum Of 10,000Mm; Width: 380Mm; With Fixed Type Taliscas; Horse With Metal Structure By Coating The Pit At The Bottom Of The Treadmill; Monobloc Structure Built With Steel Sheets; Flat Steel Plate Base For Sliding The Belt; Useful Lona 1000Mm Width And 800Mm Talisca Width; Minimum Talisca Height: 50Mm; Minimum Elevation Height: Xxxm. Equipped With A Minimum 3Hp Reducing Motorcycle With Control Through Frequency Inverter And Can Regulate The Speed Of The Same From 0 To 8 M/M; Talistos Canvas And Amendment Type Pressed For Lifting System And Side Fences; With Electrostatic Painting; The Lifting Treadmill Must Be Compatible And Installed/Coupled With The Flat Separation Treadmill With Dimensions Of: 1010Mm Height X 1380Mm Width X 10500Mm Length, Through A Feed Funnel, Joining The Two Equipment- Warranty: Minimum 12, Prensity That Is New; With Minimum Dimension Pressing Box (Width 1000Mm - Height 1400Mm - Depth 600Mm); With Safety Door; Three -Phase Engine Of At Least 5Hp; Minimum Nominal Hydraulic Power Of 15T; 1020 Or Higher Steel Plate Structure In The Minimum Thickness Of 3/16 ”; Electrostatic Painting; 220V Three -Phase Voltage; Engine Drive In Direct Starting; Hydraulic Manual Drive Through Command Lever; Safety Systems That Meet The Current Abnt Nbr Standards And Regulatory Standards (Nrs)- Emergency Devices; Control Panel With Failure Detection Of Its Components; Mechanical Retention System; Food Mouth Of At Least 500 X 1000Mm; The Equipment Should Be Delivered With Hydraulic Oil And Other Accessories Necessary For Its Full Operation After Installed; The Equipment Should Be Delivered With A Removal And Bales Handling Car Compatible With The Equipment- Warranty: Minimum 12 Months., Electronic Scale With New Rampament; Capacity Of Up To 1,000Kg; Division (Accuracy): 500G; 100Cmx100cm Platform; Made With 1020 Steel Sheets Fully Reinforced Floor Type Without Column; Rs-232 Output For Printer And Computer; Electrostatic Painting; For Weighing Of Bales Certified And Standardized By Innmetro; Equipped With Access Ramp With Sae 1008/1010 Structure, With 3Mm Sheet Thickness; 10 Degree Slope R Ramp With Non -Slip Tape On The Sloping Face, Fixed By Bushings; Warranty: Minimum 12 Months, Motorized Forklift And New Equipation; Motorized Forklift; Automatic Transmission; Type Triplex Mast; Minimum Load Capacity: 2, 5Ton; Minimum Height Elevation: 4000Mm; Equipped With Grills For Bales; With Fire Extinguisher; With Massive Tire; Equipped With Lateral Hydraulic Travel; Co