Tenders Are Invited For Installation Of Partitioning - New Building School Building At The Vocational School Center Odenwaldkreis Mobile Separating Wall

Installation Of Partitioning - New Building School Building At The Vocational School Center Odenwaldkreis Mobile Separating Wall. Subject Of 9 Individual Elements, D = Approx. 100 Mm, Horizontal Movable, Of Which 7 Normal Elements, 1 Hatching Door Element, 1 Telescopic Element For Closing The Partition, With A Wall Compress Bar 50 Mm And Wall Connection Strip 80 Mm. When Closed As A Uniform Wall Area, With Narrow Joints Between The Elements And Without Visible Aluminum Profiles On The Edges. Sugging Door Element: Passage Width I.L. At Least 90 Cm, Passage Height 210 Cm. (Escape Route) Installation Of Surface, Including Lying Taping System, With A Pressing Set On Door, With A Gym Mussel Made Of Stainless Steel, Matt, Shell Sign With Embedded Activation Handle, Covered With Panic Function Elemental Line: 2-Point Suspension On Ball-Bearing Roller Wagons Made Of Steel And High-Grade Plastic, Plastic, Free Of Wear. Subsetting The Elements 90 ° To The Main Running Axle, In One One-Sided, On The Basis Of A Parking Plan, Surface Material And Color: Planking Made Of Synthetic Resin-Bound Wooden Chipboard Din En 13986, For Load-Bearing Purposes, Use In The Dry Area, Usage Class 1 Din En 1995-1-1, Flat Type P4 P4 Din En 312, Surface With Hpl Class En 438 After Standard Collection Or In Accordance With Ag, Fire Protection Requirements Of The Construction B1 (Flame Retardant). Back, If Necessary, With Suitable Return Material. Color Of The Rail According To The Color Of The Partition Planking. Cover Plates On Site Individually Interchangeable. Plant Below And Top With Shadow Joint 25 Mm To The Prefabricated Floor Or To Go. Ceiling, Metal Parts Black Anodized Or Coated With Special Seals. Other: Element Connection With Vertical Aluminum Profiles E6/ Ev1 (Groove/ Spring) Including Magnetic Strips. Funded Execution Of The Telescopic Element, No Doubles. Adjustment Of The Elements Must Be Possible Without Opening The Suspended Ceiling. Spring -Stored Sealing Strips To Compensate For Surface Unevenness. Applicant At The Bottom And 2 Kn. Operation Manual. All Print Beams Are Operated Centrally Via A Removable Crank. Without Floor Running Rail. Sound Insulation According To Din En 20 140-3: For The Wall (Without Hatching), A Sound Insulation Detection Of At Least R W, P 57 Db Must Be Presented. For The Slip Door Element, A Separate Sound Insulation Detection Of At Least R W, P 37 Db Must Be Presented. A Valid Test Certificate (Including Complete Sound Insulation Test Report) Is Imperative And Presented. Installation Location: On The Ground Floor Axis 5/D - E, As A Separation Between The Entrance Area And Multifunctional Room. Lateral Connection To The Stb And Drywall On Site Attachment Of The Rail On The Top To The Top Of The Ceiling / Hanging Length Construction (Ceiling Seal In A Separate Position). The Rail Is Installed In Time For Element Assembly With The Installation Of The Ceiling Seal. The Separation Of The Floor Structure Is Based On The Soul.