Bids Are Invited For Price Registration For Future And Eventual Acquisition Of Utensils, Playgrounds, Electrical Equipment, Electronics, Appliances And Furniture In General, According To Specifications Contained In The Term Of Reference, In Compliance With The Needs Of The Secretariats And Sectors Linked To The City Hall Of Simonesia/Mg.

Split Inverter Air Conditioner 18000 Btus - Capacity 18000 Btus; - Split Type Inverter; - Vnergic Classification A; - Remote Control; - 1600W Power; - Minimum Temperature 18 °; - Air Flow (M³/H): 995 - High, Medium And Low Speed; - External Condensing Unit; - Voltage 220V. Main Quota Wide, Medium And Low Participation; - External Condensing Unit; - Voltage 220V. Main Quota Reserved For Me, Epp And Mei, Split Inverter Air Conditioning 30000 Btus- Capacity 30000 Btus; Split Type Inverter Vnergic Classification A; - Remote Control - Minimum Power 2600W; High, Medium And Low Speed; - External Condensing Unit; - Voltage 220V; Main Quota - Wide, Medium And Low Participation; - External Condensing Unit; - Voltage 220V; Main Quota Reserved For Me, Steel Cabinet - 2 Doors/ 4 Shelves High Steel Cabinet, Divided Vertically Into Two Compartments By Partitions With Independent Doors, Endowed With Four Removable And Adjustable Shelves In Each Compartment. - Width: 900 Mm +/- 10 Mm; - Depth: 400 Mm +/- 10 Mm; - Height: 2100 Mm +/- 10 Mm; - Ink Layer Tolerances: Minimum 40 Micrometers /Maximum 100 Micrometers. - Body, Partitions And Doors In Cold Rolled Steel Plate - Plate 22 (0, 75 Mm). - Shelves And Reinforcement Of Cold Rolled Steel Slate - Plate 20 (0, 90 Mm). - Cold Laminated Steel Plate Base - Plate 18 (1, 25 Mm). Door Locking Bars Ø = 1/4 ”(Minimum). Internal Hinges Not Visible On The Outside Of The Furniture In Cold Rolled Steel Plate - Plate 14 (1, 9 Mm) At Least 75 Mm High - Three Units Per Door. Fully Metallic Doorknob And Canopy, With Cremona System Locking. Cylindrical Drum Lock Embedded In The Doorknob With At Least 4 Pins. Duplicate Keys Attached To The Corresponding Door Handles. Printed Or Overlaid-Holder Carrier, The Latter Being Exclusively Of Chrome Non-Ferrous Metal Alloy. Painting In Epoxy/ Polyester Hybrid Powder, Bright Electrostatic, Greenhouse Polymerized, Minimum Thickness Of 40 Micrometers In Gray. Based, Resistant Backgrounds And Sides, Containing Feet For Ground Elevation. Main Quota Wide Participation, Containing Feet For Elevation In Relation To The Ground. Main Quota Reserved For Me, Steel File Steel File With Four Drawers Mounted On Telescopic Rails That Allow Full Opening. - Height: 1330 Mm +/- 10 Mm; - Width: 470 Mm +/- 10 Mm; - Depth: 710 Mm +/- 10 Mm; - Ink Layer Tolerances: Minimum 40 Micrometers /Maximum 100 Micrometers.- Steel Body And Internal Structure Plate 22 (Thickness 0, 75Mm) In Gray Color; - Drawers On Plate 24 (0, 60Mm)- Telescopic Tracks And Zincaded Guides In Plate 18 (1, 20Mm) Or Higher; - Drawing Rod Of Plate 16 (1, 50Mm); - Lower Closure (Next To The Floor) On Plate 24 (0, 60Mm). - Zamac Handles In 96Mm Steel Finish. - Cylindrical Drum Lock (Minimum 4 Pins) With Simultaneous Drawer Locking System. - Keys In Duplicate. - Compressors For Folders In All Drawers. - Printed Or Overlaid-To-Bearized, The Latter Being Exclusively Of Chrome Or Nickel Non-Ferrous Metal Alloy. Drawers With Telescopic Rails Composed Of Linear Guides With Steel Ball Bearings, With A Minimum Vertical Load Capacity Of 45Kg And Mechanism Against Exhaust. Leveling Shoes