Request For Quotation Purchase Of Motor Oil And Lubrication Of Car

Motor Oil For Turbocharged Diesel Engines 15W-40, Premium, In Canister Of 20 Liters. The Canister Should Be In Factory Packaging. For Construction And Road Equipment (Agricultural, Mining, Etc.) And Some Highway Equipment, For Diesel Engines With Turbocharging (Or Without) Ecological Class To Euro-2 Inclusive, Where The Level Of Operational Properties Of The Api Ci-4 Is Not Lower. Physico-Chemical Characteristics: Kinematic Viscosity At 40 ° C, 445- 100.4 Degrees. Kinematic Viscosity At 100 ° C, Mm2 14.9. Valid Index -155. The Flash Temperature In An Open Crucible 233 ° C. The Temperature Of The Solidification, ° C Gost 20287 -38. An Alkaline Number, Mg Koh/G Gost 11362 -11. Sulfate Ash, % -1.5. Density, At 20 ° C, G/Cm3 0.875. The Validity Of The Certificate Of Quality Of Conformity Of The Goods According To The Description. Also, After Delivery, Samples Will Be Selected For An Analysis Of The Quality Of The Goods According To The Technical Characteristics In An Independent Laboratory. Sending By Mail Is Strictly Prohibited, In This Section The Mail Does Not Produce Delivery At The Place., Lubrication Of Automobile Lutol-24, Packing 10 Kg In Metal Containers, Antifriction Multi-Purpose Waterproof Lubricant Based On Mineral Oil, Lithium Soap And A Highly Effective Package Of Additives. It Is Used In Rolling And Sliding Bearings Of All Types, Hinges, Gear And Other Transmissions; On The Friction Surfaces Of Wheeled And Tracked Vehicles; In Industrial Mechanisms, Electric Machines, Etc. He Is Operating At A Temperature Of -40 To +120 ° C. Specifications: Typical Physico-Chemical Characteristics: Litol-24 Indicators Of The Dropproof Temperature, ° C 190, Penetration At 25 ° C With Mixing, 10-1 Mm 240, Viscosity, Pa At -20 ° C And Average Gradient Of Deformation Rate 10 S- 1 641, At 0 ° C And The Average Gradient Of Deformation Speed 10 S -1 221, At 50 ° C And The Average Gradient Of Deformation Speed 10 C-1 9.9. The Limit Of The Strength Of The Shift, Pa At 20 ° C 745, At 80 ° C 235. Colloid Stability, % 11, Tribological Characteristics At 20 ± 5 ° C Per Csm: Zadir (From), N 28.2, Welding Load (Rs), N 1410, Critical Load (Rk), N 630. The Presence Of A Certificate Of Quality Of Conformity Of The Goods According To Description. Also, After Delivery, Samples Will Be Selected For An Analysis Of The Quality Of The Goods According To The Technical Characteristics In An Independent Laboratory. Sending By Mail Is Strictly Prohibited, In This Section The Mail Does Not Produce Delivery At The Place. Gost 21150-87