Quotation Are Invited For Pole Box;8-Way;Grp;Electrif;60A

Quotation Are Invited For Pole Box;8-Way;Grp;Electrif;60A Delivery Date: 2025/03/24 Delivery To: Electricity - Ndabeni Red1 Plant / Ph: 511 0410 Delivery Address: 01 Melck Street, Ndabeni Closing Date: 2025/03/04 Closing Time: 12:00 Pm Description: 11 Each X Pole Box;8-Way;Grp;Electrif;60A Specification: * Pole Mounted Sdb - Type: 8-Way Pole Mounted Service Distribution Box (Grp); Material: Uv Stabilised Grp Sheet Moulded Compound (Smc); Typical Application: Electrification Areas; Mcb Ratings: 60A, 1-Pole, 240V, 5Ka, Main 3 Phase Breaker 100A, 3-Pole, 415V, 5Ka; Mcb Characteristic: Hydraulic Magnetic, Curve 1 / Curve D; Description: Pre-Wired Sdb Complete With Pole Mounting Brackets,Door Shall Be Padlockable, Openning By Rotating Upwards In The Vertical Direction And Shall Be Held Open Using The Door Stays And/Or Hinge Pivoting Assembly And Shall Overlap The Top, Left And Right Side Of The Base. Wooden 19Mm Thick Equipment Mounting Panel, Neutral Bar, 35Mm High X 15Mm Deep Din Rail For Meters, Suitably For 155Mm(H) X 110Mm(D) X 65Mm(W) Mcu, 4 X 2M X 25 Sq Mm Cu Single Core Uv Stabilised Pvc Insulated Incoming Cables,14 X No 0 Bottom Fitted Pvc Glands With Glands Plugs And Other Components As Required In Terms Of Cct Specification, And Generally In Accordance With The Layout Detailed In The Drawings; Colour: G29 Light Grey; Dimmensions: Door Opening To Fit Panel Mounting Board Size 450 (H) X 615 (W) Mm; Drawings: Dr 3326 Sheets 1 And 2 Rev 4 And Dr 3164 Sht 1 Rev 8, Sk 5213 Sht 1 Rev 2; Standards: Nrs 032, Vc 8036; Cct Specification: Cee 44. ************************* Clause - 2.14.1 & 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Suppliers Commercial Position (Including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/Technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /Technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-Responsive. Please Submit Technical Data Information With Your Quote Submission. ************************** Nb: The Municipal Bidding Document 6.1 (Mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. Tender Link : Http://Web1.Capetown.Gov.Za/Web1/Procurementportal/Rfq/Details/301239