Tenders Are Invited For Renovation And Construction Works And Modernizations For Pfb.

Task No. 1 - Renovation Works. 3 - Grave - Tasks 1-5 (Annex 3 To Swz); 2) Roofing Robots From The Top Irradiates To The Motława River (Exposure From The Motława Side): A) Dismantling Of Bodyworking Of The Metal Sheet Metal From Galvanized Sheet Brick Wall For Arranging The Tip And Priesthood With A Titanium -Galvanized Sheet To A Minimum Depth Of 1.0 Cm In Clinker Brick, C) Arranging The Tin Tin Metal Sheet, Min. The Thickness Of 0.55 Mm At The Length Of The Brick Wall (Sealing The Flexible Mass Of The Weld) And The End Of The Priesthood From The Brick Wall And The Protrusion To The Beam Irradiation With The Sealing Of The Elastic Mass; Connections Of Sheet Metal For Single Leaf Or By Soldering Sheets, D) Laying 1 Layer Of Thermoscus Felt With A Thickness Of Min. 5.2 Mm, Coarse -Grained Sprinkles, Red, With A Brick Wall To A Height Of Mints 40 Cm And Priesthood On The Brick Wall; Concrete, Brick Substrate Should Be Primed With Solvent Asphalt Agents - Papa Surface According To The Bill Of Quantities, E) Gutter Adjustment With A Diameter Of 200 Mm Along The Roof On A Section Of 14.80 Mb, F) Tin -Like Tin Made Of Copper Sheet With A Ground Along With Replacement And Attachment Of New Dowels Fastening Copper Sheet To Fireworks On A Section With A Length Of Approx. 25 Mb And A Width Of 60 Cm (Observation Deck), G) Replacement Of Terrace Tiles Along With A 5% Decrease On An Area Of ​​3.50 M2 At The Outflow From The Drain Pipe On The Terrace Towards The Rafting Basket From The South; 3) Roofing Works From The Rosette On The Highlight Of Large And Small Exposure (Glass Elevator Input No. 225): A) On The Flat Roof Above The Green Room: The Inner Side Of The Flat Roof Between The End Of The Flat Roof With Thermosal Roof, And The Wall Of The Brick Firefighting And Wall Of The Building - Sealing The Connections With The Wall With Elastic Mass, B) Replacement And Renovation Of The Tin Bin, Tin Bins Mahoń Color On The 6.0 X 0.45 Mb Section With Installation Of A New Priesthood Made Of Galvanized Plate Along The Brick Wall With An Indentation To A Brick Wall To A Depth Of 1 Cm, C) Replacement Of The Bodywork From The Brick Wall Of The Building Of The Building 7.50 M Firepower) 7.0 Mb With Sealing Of The Wall Flexible Mass Brick With Tiles, E) Gutter Adjustment With A Diameter Of 200 Mm Over A Section Of 9.40 Mb Along The Roof, F) Replacement Of The Tin -Plated Sheet Metal In The East On The 9.0 Mb X 0.70 M, For The Bodywork Of The Flashing Of The Ridge, The Illumination With 0.6 Mm Thick Copper Sheets, With A Undercoat With A Jute Mat Sealed With Agents Sealing To Profile The Shape Of The Profile Exposure And Sealing The Ridge Connecting The Lifts Is Illuminated; 4) Roofing On The Flat Roof At A Variety Of Lighting At A Glass Elevator, Entrance No. 225): A) Laying Thermosal Felt (Parameters, As In Point 2.D) On The Visor At The Entrance 225 Along With Sealing Of The Tinsmith On A Brick Wall Of The Building, B) Laying The Thermosal Felt (Parameters, As In Point