Tenders Are Invited For Performance Of Partial Renovations Of Current Streets And Municipal Roads In The Janów Lubelski Commune In 2025

The Subject Of The Contract Is The Implementation Of Partial Repairs And Current Streets And Municipal Roads In The Janów Lubelski Commune In 2025.1. The Order Of The Order Includes: 1.2. Performing Partial Repairs Of Bituminous Surfaces With Sealing Edges Of The Asphalt Emulsion (Renovation With Manual Cutting Of The Edges With A Depth Of 4 Cm (100Kg/M2), In The Amount Of 200 M2; 1.3. Conducting Partial Repairs Of Particle Pavement Made Of Concrete Cobblestones (Cubes With Ankle Various Thicknesses And Dimensions On The Sand Beds Filled With Sand) The Investors Cube, In The Amount Of 100 M2; 1.4. In The Amount Of 10 M21.6 Asphalt Surface With The Asphalt Surface With The Addition Of Appropriate Thermoplastic Polymers, In The Amount Of 100 M2; 1.7. 5-8 Stone Fraction In The Amount Of 8.0 Dm3m2, In The Amount Of 150 M2. Partial Repair Of Asphalt Surfaces /Point 1) To 6), In The Amount Of 5,000 M21.8. Performance Of Partial Repairs Of Stone/Stone Surfaces, With Mechanical Compaction Of The Stone/Crushed Stone, Mainly Hands Up To 5 Cm 200 M21.9. Surface Execution. Consolidation Of Road Surfaces Asphalt Gray Of 8-12 In The Amount Of 10.0 Dm3m2, In The Amount Of 4,000 M2, Order Details; - Cutting The Surface Using A Saw For Cutting Asphalt Or Milling With A Milling Machine At A Depth Of 4 Cm, Removal Of A Steed And Development By The Contractor; - Arrangement Along With The Thickening Of The Asphalt Mix Of The Thickness Of Wed. 4 Cm, Sprinkling The Bottom Of The Defect And Spreading The Walls With An Asphalt Emulsion, Closing The Contact Of The Surface And Sealing The Edges Using Asphalt Emulsion; - Adjustment Of The Sewage Wells On The Ring With Milling The Surface Around The Well, Reproducing The Surface Of The Defect Around The Wells With A Well -Being Well 0.5 M Well, Alternatively Supplementing The Defect With Concrete Cube On Cement-Sand Bed;-Milling Of Asphalt Surfaces Of Transverse Or Longitudinal Damage Using A Milling Machine 2 Cm; - Sealing Of Milled Asphalt Surface Using An Asphalt Pickle With The Addition Of Appropriate Thermoplastic Polymers. Asphalt Floods Should Have Technical Approval. Before Using The Asphalt Pickle, The Gap Should Be Properly Cleaned And Protected With A Thickness, Which Will Increase The Adhesion Of The Asphalt Pickle To The Walls Of The Gap. In Order To Quickly Put The Seal To Move, The Top Of The Sealing With Dry Fine-Grained Material Dedicated To This Type Of Works Should Be Sprinkled. The Method Of Execution Of The Order Is Described In Detail In The Technical Specification And Acceptance Of Construction Works, Which Is Annex 2 To Swz.