Tenders Are Invited For Modernization Of The Pre -Funeral House At The Municipal Cemetery In Śrem - Ii Stage

Description Of Works To Be Done In Stage Ii: I. Works Inside The Object - General Construction: 1. Demolition Works:- Disassembly Of Door And Frame Wings,- Dismantling Wooden Windows With Frames,- Dismantling Of Window Grilles,- Forging From The Wall Of External Window Sills,- Forging From The Wall Of Ventilation Grilles,- Dismantling The Reinforced Concrete Foundation In The Pom. No. 5 By Inventory. There Is A Tofundament Under The Old Cooling Technology,- Forging Holes In The Internal Wall For New Doors,- Dismantling Parts Of Part Of The Partition Walls 12 Cm + Plaster Thickness,- Forms Old Tiles Made Of Floors And Walls,- Forms Loose And Cracked Wall Plasters,- Layer From Lastrico On The Floor,- All Demolition Materials Should Be Removed And Utilized. 2. Expanding The Door Openings:- Existing Door Openings Should Be Properly Expanded So That The Door With The Transition Light 80, 90 Cm,- Over The Widen And Newly Carved Holes Can Be Deposited. Bricking The Holes In The Walls:- Walling The Holes In The Walls After Dismantling The Door, 4. Repair Of Cracks And Gaps In The Walls:- Repair Of Cracks In Partition And External Walls By Settling Spiral Fi 6 Mm And A Length Of 100 Cm Every About 25 Cm,- Gaps Between The Wall And The Floor And The Ceiling Should Be Filled With Plastic, 5. Masonry Of Partition Walls:- Bricklaying Of Ceramic Partition Walls Gr. 12 Cm.6. Plastering/Leveling Of The Walls To The Vertical + Coat:- Reproduction Of The Cut Internal Plasters, Alignment To The Walls Of The Walls With Mortar,- Wall Stunning, 7. Painting Works:- Preparation For Painting The Ceiling Surface By Cleansing The Surface, Putting The Unevenness,- Priming The Surface Of The Ceilings And Walls,- Painting Twice The Surface Of The Ceilings And Walls With Emulsion Paint Of The Color Indicated By The Investor. 8. Daming Insulation Of The Floor:- After Leaning The Lastrico Layer, The Surfaces Should Be Vacuumed From Dust,- Priming The Surface With A Deeply Penetrating Substrate,- Moisture Insulation From A Single Component Mass Of Highly Flexible Water, I.E. Liquid Sealing Mass. 9. Concrete Floor:- Before Pouring The Floor, One Layer Of Polyethylene Foil Should Be Spread. 0.2 Mm,- Making A Traditional Concrete Floor With A Mixed Mix With A Thickness Of About 6 Cm, The Thickness Of The Floor Should Be Determined After The Lastrico Layer And Determining The Level Of The Tiles Throughout The Facility. The Floor Should Be Reinforced With Steel Fiber 50/1D.10. Laying Tiles On The Walls And Floor:- In All Rooms, Tiles Should Be Placed On The Floor With Pedestal Height Up To 10 Cm (Without Pedestal At The Walls Finished With Tiles From The Floor Level),- In Rooms Where The Required Tiles Should Be Laid To A Height Of 2 , 1 M, 11. Window And Door Joinery:- Installation Of Pvc Windows,- Installation Of Wooden Interior Doors (Wooden Frame + Filming From Chipboard),- Installation Of Internal Window Sills With Pvc.Ii. Electrical Installation Works: 1. Demolition Works:- Disa