Request For Quotation Goods Of The Kgkp Management Of The Parks Of Culture, Rest And Squares

Solidel Of The Characteristics To Coordinate With The Customer!, The Furniture Stapler In The Aluminum Case, With The Function Of Adjusting The Impact Force, Is Compatible With Brackets Of Type 13 And 53 With A Size Of 6-16 Mm And Nails Of Type 300 16 Mm In Size. A Tool For Fixing On A Wooden Base Of The Organ, Plywood, Fiberboard, Chipboard, Film, Insulation And Other Sheet Materials. For The Assembly And Sheathing Of Furniture, Laying Carpet Coatings And Insulating Materials, The Performance Of Baguette. Suitable For Professional Use. A Two -Position Switch That Regulates The Force Of Impact Facilitates Work With Long Brackets And Solid Materials. A Long Thin Nose - For Working In Limited Space. A Balanced Design - When Using A Stapler, There Is No Return. Strength - The Case Is Resistant To Damage, Because Made By Casting Method From Aluminum Alloy. Safety - The Handle Is Fixed In A Horizontal Position, Preventing The Accidental Operation Of The Mechanism. Easy Control Of The Number Of Fasteners - Using A Special Window You Can See How Many Brackets Are Left, And Load Them In Time. Ergonomic Handle For The Optimal Position Of The Hand. Characteristics: Handy Material: Aluminum Material Material: Steel The Number Of Components In The Handle: Ergonomic, Plastic Overlage Type Of Brackets: 13, 53 Size Of Brackets: 6-16 Mm Adjustment Of Impact Force: Two-Position Features: Fast Loading Of The Bracket, Shock Mechanism Of The Spring Type Suitable Consumables: Suitable Consumables: Brackets, Nails. Place Of Delivery-Karaganda Region, Temirtau, Republic Avenue, 13A, Preliminary Coordinate The Goods With The Customer, With The Provision Of Documents Confirming The Compliance Of The Goods Supplied With The Requirements Established By Technical Regulations, The Provisions Of Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., The Drainage Pump Designed For Pumping Water From Rivers And Reservoirs, With The Average Level Of Water Pollution, Is Also Used To Irrigate And Supply Water From Depth. Automatic Lock. The Float Switch Must Turn Off The Pump When The Water Level Is Reduced, Allowing To Avoid Overheating And Failure Of It, With An Increase In The Water Level, The Pump Is Again Turned Off. 8 M., Throughput - 12.96 Cubic Meters. M/Hour, Network Voltage - 220/230 V, Power Consumption - 550 W, Nominal Power - 550 W, Functions - Overheating Protection, Float Switch, Included - Cable, Fitting. Water Quality Is Dirty, The Size Of The Transmitted Particles Is 35 Mm., The Permissible Fluid Temperature Is From 1 ° C To 35 ° C. Plastic Case Material. The Mechanism Of The Pump Is Centrifugal. The Thread Diameter Of The Outgoing Hole (G) 1½ ″, ½ ″, 1/2 , The Length Of The Network Cord 10 M, Installation Of The Pump Vertical. Plastic Shock -Resistant Case; Automatic Work Thanks To The Float Switch; Overheating Protection; Pen For The Convenience Of Carrying; For Pumping Any Not Very Aggressive Liquids. Place Of Delivery-Karaganda Region, Temirtau, Prospekt Republic, 13A, Preliminarily Coordinate The Goods With The Customer, With The Provision Of Documents Confirming The Compliance Of The Goods Supplied With The Requirements Established By Technical Regulations, The Provisions Of Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Plants And Wiping Material. The Length In The Roll Is 100 M, Width 1400 Mm. Holstery Non -Woven 100% Cotton Blade Of White Color. High -Quality Technical Fabric For Wet Cleaning Of Rooms, Wiping Metal And Equipment From Oil, Dirt And Dust. It Should Be Suitable For Polishing, Drainage, Perfectly Absorb Moisture, Collect Oil And Paint. The Rag Should Perfectly Absorb Various Liquids, Oils, Do Not Leave Stains, Piles, Not To Melt. Soft To The Touch Material Is Relevant For Technical Purposes, For Wiping Equipment And Cleaning. The Main Purpose Is Cleaning Of Premises With Great Cross -Country Ability. I Must Absorb Water And Oil, Do Not Leave The Pile., A Locksmith Hammer With A Wooden Handle Of 800 Grams Of Equipment In Industry And In Everyday Life Consists Of A Combined Box And A Wooden Handle. Material Of The Shock Box Steel - 0.8 Kg. Material Wood, Product Length 350 Mm. Place Of Delivery-Karaganda Region, Temirtau, Republic Avenue, 13A, Preliminary Coordinate The Goods With The Customer, With The Provision Of Documents Confirming The Compliance Of The Goods Supplied With The Requirements Established By Technical Regulations, The Provisions Of Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Plasma Cutting Device (Plasmoresis) Inverter For Plasma Cutting Of A Professional Type For Working With Metal Parts And Reinforcement Up To 20 Mm Thick From Alloys Conducting Electric Current. Effective When Working With Aluminum, Copper And Brass Blanks, Stainless And Galvanized Steel. The Maximum Diameter Of The Cut Aluminum Wire Is 12 Mm. The Unit Works From A Three -Phase Power Grid. During Operation, It Consumes A Current Of 13.6 A. The Cutting Current Is Adjustable In The Range Of 15-70 A. Which Allows You To Work With Materials Of Various Thicknesses And Ensures The Accuracy Of Cuts. Ionized Air Under A Pressure Of 4-8 Bar Transfers Electric Arcs To A Metal Blank. High -Frequency Arcs Ensure Its Stability. The Minimum Heating Of The Metal Around The Working Area Allows You To Create An Even And Neat Cut. It Works At Temperatures From -20º To +50º. The Kit Includes A Plasma Cutter With A Length Of 5 M, A Grounding Terminal Of 2.5 M Long, Moisture Separator And A Gas Hose 3 M Long. A Limiter Is Provided To Achieve An Even Cut. The Burner Cable Is Disconnected. Weight 16.51 Kg Allows You To Easily Transport Plasmores. The Voltage Of The Supply Network, B380 ± 15%. Cutting Capacity, M. Maximum Thickness Of The Cut Of Steel Structures And Reinforcement Is 20; Sheet Steel - 20; Stainless Steel - 20; Aluminum - 12. The Arc With A High -Frequency Arc. Compressor Performance, L/Min 14. Frequency Of The Supply Network, Hz 50. Razza Current Regulation Range, A15-70. Delivery-Karaganda Region, G. Temirtau, Republic Avenue, 13A, Preliminarily Agree With The Customer, With The Provision Of Documents Confirming The Confirming Compliance With The Goods Supplied With The Requirements Established By Technical Regulations, Standards Of Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Plastic Pipe Iron The Welding Machine Is Designed To Connect Pipes And Fasteners Made Of Thermoplastic Material Using Welding. The Device Provides Quick And Convenient Operation When Creating Water Supply Systems. In Addition, It Has An Easily Readable Digital Display, Which Allows You To Control The Operating Parameters Of The Device. The Diameter Of The Pipe For Welding 16, 20, 25, 32, 40, 50, 63 Mm., Type Of Welding Of Plastic Pipes - Butt. Current Frequency 50 Hz. The Maximum Operating Temperature Is 300 ° C. The Voltage Of The Network 220-240 V. Reamed Capacity-850 Vtmesto Deliveries-Karaganda Region, G. Temirtau, Prospekt Republic, 13A, Preliminarily Coordinate The Goods With The Customer, With The Provision Of Documents Confirming The Compliance With The Requirements Established By Technical Regulations, Standards Of Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., The Forged Carpentry Ax With The Weight Of The Working Part 800 G Has An Ergonomic Wooden Handle And Sandblasting The Canvas. An Ax For Cutting And Drains Of Wood Of Any Kind Of Breeds. The Head Of The Ax Should Be Strong And Resistant To Loads Should Be Made Of 45 Carbon Steel, The Working Surfaces Should Be Hardened To The Hardness Of 48-52 Hrc, The Ax Is Made Of Solid Deciduous Wood And Covered With Protective Varnish. Weight Of The Canvas 800 G. The Length Of The Handle Is 380 Mm. Messo Deliveries-Karaganda Region, The City Of Temirtau, The Avenue Of The Republic, 13A, To The Preliminary Consign The Goods With The Customer, With The Provision Of Documents Confirming The Compliance Of The Goods Supplied With The Requirements Established By Technical Regulations, The Provisions Of Standards And Other Documents In In Accordance With The Legislation Of The Republic Of Kazakhstan.