Tenders Are Invited For Heat Transfer Station Construction Work-Ostwache, New Construction Of A Rescue Station; Heat Supply Systems

Heat Transfer Station Construction Work-Ostwache, New Construction Of A Rescue Station; Heat Supply Systems. A Heat Generation Or Heat Supply (District Heating) Is Already Available In This Property. There Is A District Heating Supply In The Main Technology Room Of The Adjacent Fire Station. From This Fw Station, Local Heating Line Must Be Laid To The Walk-In Shaft On The South Side Of The Building. The Planning Of The Tga Continues From The Launch. On The Existing Distributor In The Fire Department Fire Brigade, A Connection For Local Heating Line To The Emergency Wacher Must Be Established. The Heat Distribution Network Of The Rescue Station Is Newly Divided Into 6 Heating Circuits Via A Heating Distributor In The Technology Room, 2 X Static Heaters Are Divided Into East And West, 1 X Fb Heating, 2 X Heating Register Ventilation Devices (1 X Heating Register Ventilation Hall And 1 X Heating Register Ventilation Rest And Rest And Side Rooms) And 1 X Wwb. All Pipelines For The Main Distribution To The Individual Consumers Wwb, Heating Register Ventilation, Fb Heating Distributors As Well As The Complete Supply Of The Static Heating Surfaces In Galvanized Steel Pipe According To Din En 10305-3 Including Insulation (100 Or 200 %) As A Lower Distribution. Including Distributor, Pumps And Fittings. The Pipeline Is Carried Out In Suspended Ceiling Areas And Visible In The Vehicle Hall Below The Ceiling. All Heating Surfaces And Convectors In The Upper Floor Are Connected Directly From Below, So That No Individual Connection Lines Are Visible In Front Of The Wall. The Lower Heat Distribution For The Office Space On The West Side Of The Building Is Laid Below The Canteration In The Installation Area. 200 Percent Insulation Is Provided Here. All Cable Enforcements By Qualified Walls And Ceilings (F30-F120) Are Necessary In This Respect, Are Closed According To The Mlar To Ensure Protection Against Fire And Smoke Rollover. Convectors (Floor Assembly) Are Equipped For The Office Space And Relaxation Rooms Of The Building. All Other Rooms To Be Heated Are Equipped With Normal Flat Radiators (Wall Mounting). The Room Temperature Control Of The Individual Rooms Is Classic With Thermostat Sensor Elements. The Heating Surfaces In The Area Of ​​The Relaxation Rooms And Within The Office Space Are Carried Out In Front Of The Parapet With Stand Consoles On The Floor. Wall Mounting Is Not Possible Due To The Windows Or Parapet Design.