Bids Are Invited For Pulmonary And Bipap Fan Acquisition

(L1) 6515.12895-Pulmonary Ventilator, Microprocessed Electronic Fan For Pediatric Neonatal Patients And Morbid Obesity, Suitable For Use In Intensive Care, With At Least The Following Ventilation Modes: Voel Volume Vertilation (Assisted / Controlled, Simv) ; Pcv Controlled Pressure Ventilation (Assisted / Controlled, Simv); Controlled Pressure Ventilation, Bipap Or Bi-Physical, Which Allows Spontaneous Ventilation (Active Expiratory Valve); Non -Invasive Ventilation - Niv; Ventilation In Invasive And Noninvasive Cpap, Psv Ventilation With The Possibility Of Supporting Support Cycling Of The Support Pressure, Parameters: Fi2 From 21 To 100%; Middle Volume Should Enable Adjustment From 10 Ml To At Least 2000Ml; Respiratory Rate From 5 To 150 Rpm; Inspiratory Time From 0, 2 To 5 Seconds At Least; 5 To 70% Supporting Pressure Cycling Of Inspiratory Flow Peak; Inspiratory Pressure From 5 To 80 Cmh2o. Support Pressure From 5 To 70Cmh2o At Least. These Pressure Values ​​Cannot Be Considered With Peep, Ie They Must Be Considered Individually; Peep From 0 To 50 Cmh2o At Least; Have Inspiratory Sensitivity By Flow And/Or Pressure Sensitivity; Have Adjustable Rise Time (Rise Time) Or Inspiratory Time Control On All Pressure -Controlled Modalities; Monitoring System: At Least 12 ”Colored Screen With Touch -To -Touch Drive For Ease Of Operation And Possibility Of Slope, Rotational Button For Selection, Adjustment And Confirmation Of The Parameters. Presentation Of Curves Pressure X Time, Flow X Time, Volume X Time And Loops Pressure X Volume (Presentation Of At Least Three Curves Simultaneously In Real Time); The Equipment Must Have Numerical Values ​​Of The Main Ventilatory Parameters; The Equipment Will Not Be Able To Monitor Any Parameter Through Proximal Sensors To The Patient (In Y), Except For Neonatal Patients, Where The Equipment Can Work With This Tip, (L2) 6514.60721-Breathing For Intermittent Positive Pressure, Other Information According To With Term Of Reference And/Or Technical Descriptive Of The Process, Unid. Measurement: Unit