Bids Are Invited For Acquisition And Installation Of Electronic Scale, Waste Lifting And Watery Separation, According To Conditions, Requirements Established In This Notice And In The Respective Annexes, Considering The Transfer Instrument 4118105/2023 Between The Municipality Of Paranacyity-P And Caixa Econômica Federal - Itaipu Program More Than Energy.

Electronic Scale With Ramp, With Capacity Of Up To 1000 Kg And Division Of 500 Gram Grams, 1000 Mm X 1000 Mm Platform Made With Fully Reinforced 1020 Steel Sheets, Column-Free Floor Type, Rs-232 Output For Printer And Computer, Electrostatic Painting, For Weighing Of Inmetro -Certified And Standard Bales. Equipment Equipped With Access Ramp, With Sae 1008/1010 Structure, With 3 Mm Sheet Thickness, 10 Degree Slope And Non -Slip Ribbons On The Sloping Face, Fixed By Bushings. New Equipment With 12 -Month Warranty After Installation., Waste Rioter With A Minimum Length Of 6,000 Mm And Maximum Of 10,000 Mm And 1380 Mm Wide; With Fixed Types And Furniture, With Metal Structure Lining The Pit At The Bottom Of The Treadmill. Monobloco Type Structure, Built With Steel Sheet. Steel Sheet Flat Base To Slide The Belt. Useful 1000 Mm Canvas Width And 800 Mm Talisca Width, With A Minimum Height Of 50 Mm. Equipped With A Reduction Motorcycle Of At Least 3 Hp, Control Through Frequency Inverter, And May, By Potentiometer, Regulate The Speed Of 0 To 8 M/Min. Talistas Canvas And Amendment Type Pressed To The Sides Of Lifting And Sealing System. Electrostatic Painting. With Emergency Shutdown System To The Equipment Operators. The Lifting Treadmill Should Be Compatible And Installed/Coupled With The Flat Separation Belt, Regulate The Speed Of 0 To 8 M/Min. Canvas With Taliscs And In ..., Waste Separation Treadmill, Minimum Size Of 10,500 Mm, Equipment With Metal Structure With Anti -Corrosion Coating, Equipped With An Electric Motto Of At Least 1 Kw. Product Dimensions: 1010 Mm High X 1380 Mm Wide X 10,500 Mm In Length, Of Which 1000 Mm X 10,500 Mm Useful Width Of Screening In The Carrier Belt. Side Protection In Rubber To Prevent Waste Accumulation In The Carrier Belt. Flat Base On Steel Plate To Slide The Belt. System Of Variation In The Velocity Of The Transport Belt, Through Frequency Inverter And Potentiometer, Controlling The Advance Of The Treadmill, Determining The Speed For The Operation Of 0 To 8 Meters Per Minute. Bearings With Conveyor Belt Alignment Adjustment System. Machined And Galvanized Traction Rollers. Electrostatic Painting. With Emergency Shutdown System To Equipment Operators. The Equipment Should Be Compatible And Installed On A Width Waste Lift Of 13,800 Mm. New 12 -Month Warranty After Installation. 10/02/2025