Bids Are Invited For Acquisition Of Outdoor Gym Equipment

Lot 1 - Stretching Three Heights: Made Of Carbon Steel, Massive Pins, Treatment Phosphate Surface; Protective Film Of Thermoendurecivel Polyester Resin, Equipment For Practicing Up To Three Users., Lot 1 - Double Leg Pressure Apparatus: Strengthens The Muscles Of The Thighs And Hips. Made With Carbon Steel Tubes At Least 4 X 3 Mm; 3 ½ X 3, 75; 2 X 2 Mm; 2 X 3 Mm; Carbon Steel Plates Of At Least 4, 75 Mm To Reinforce The Structure Of The Equipment And 2 Mm For Bank And Backrest With Dimensions Of 335 Mm X 315 Mm And Stamped With Rounded Edges. Trefilated Carbon Steel Tube 2 X 5, 50 Mm Schedule 80 (60, 30 Mm X 49, 22 Mm). Massive Pins Are Used, All Beaten (Double Bearings), Phosphate Surface Treatment; Protective Film Of Color Thermocureable Polyester Resin With Electrostatic Powder Deposition System, Flexible Rubber Round Blass (53Mm X 30Mm), Mig Welding. Lange With At Least 230 Mm X 3/16 Flange, Laser Cut With Zincated Fixing Screws Of At Least 5/8 X 1 ¼ And A Minimum Of 5/8, A Minimum Of 3/3/Is A Minimum Iron Rod 8, Zincaded Screws, Washers And Fixing Nuts; 2 Metal Built -Up Buffer, 2 Injected Plastic Internal Buffer At Least 3 ½. It Allows The Use Of 2 (Two) Simultaneous Users And Offers Total Safety., Lot 1 - Double Ski: Stretches The Joints Of The Upper Limbs, Scapular Waist, Trunk And Pelvic Waist. Made With Carbon Steel Tubes At Least 2 ½ X 2 Mm; 1 ½ X 3 Mm; 1 ½ X 1.50 Mm; 1 X 2.00 Mm. Trefilated Carbon Steel Tube 2 X 5, 30X49, 22). Metalon Of At Least 30 Mm X 50 Mm X 2 Mm, Carbon Steel Plate At Least 4.75 Mm For Equipment Fixing Point And 1, 9 Mm For Foot Support Plate. Boring Bar Of At Least 3/16 X 1 ¼. Using Massive Pins, Mig Welding, Acetal Bushing, Parabout Anchor Of At Least 3/8 X 2 ½, Zincaded Screws And Fixing Nuts; Internal Embedded Buffer In Injected Plastic Of At Least 2 ½ With Spherical Finish Accompanying The External Dimension Of The Tube. Injected And/Or Rubberized Plastic Finishes. 3M Destructive Reflective Adhesive With Group Identification. 2 °) Leg Extensor; 3 °) Straight Bench Press Sitting; 4 °) Summed Bench Press Sitting; 5 °) Individual Vertical Rotation; 6 °) High Pulled. It Strengthens, Stretches, And Increases The Flexibility Of The Upper And Lower Limbs. Made With Carbon Steel Tubes At Least 2 ½ X 2 Mm; 2 X 2 Mm; 1 ½ X 3 Mm; 1 ½ X 1, 50 Mm; 1 X 1, 50 Mm ¾ X 3.00; ¾ X 1, 20; Oblong Of At Least 20Mm X 48Mm X 1, 20Mm. Round Bar ¼. Carbon Steel Plates Of At Least 9, 52Mm; 6, 35Mm; 4, 75Mm; 3Mm; 1, 90Mm; Boring Bar 3/16 X 1 ¼; 1/8 X ¾. Trefilated Carbon Steel Tube 2 X 5, 22). Massive Pins, Phosphate-Based Surface Treatment; Protective Film Of Colorful Thermo-Handcare Polyester Resin With Electrostatic Powder Deposition System, A Minimum 3/8 Parabout Lashing, Washers And Fixed Nuts; 2 ¼. Metal External Mood Buffer, Lot 1 - Orientative Plate: Material Used: Carbon Steel Tube At Least 1.020, 2 X 2Mm, 1,000 X 2,000 X 1.5Mm Plate; 3 X 1, 50Mm; Electrostatic Epoxy Painting, Holes For The Fixation Of The Equipment Of At Least 50 Cm Below Concrete; Front And Back Adhesive; Containing All Devices With Muscles Specifications Involved And The