Bids Are Invited For Acquisition Office Furniture (Kitchen Cabinets (Paneleiro And Counter), Mdf Bookshelf 05 Crystal Gray Shelves, Touch Screen 55 Slate, Swivel Chair) For The Use Of The Rehabilitation And Stimulation Of Borrower And Dependents Health

Kitchen And Counter Cabinets - White Mdp Balcan And Paneleiro Kitchen Cabinet - Technical Specification: Made Of Mdf Wood; Kit Type Composed Of Counter And Hall Cabinet; Measuring Approximately: (1200 X 900 X 500) Mm The Counter And (500 X 2100 X500) Mm The Cabinet; With Counter With 02 Doors And 01 Shelf, Cabinet With 01 Door; Body With A Minimum Thickness Of 25Mm; Polyester Painting Finish With Lacquered Edges; White; Fixed Wood In Natural Color; Minimum Warranty Of 12 Months;, Bookcase In Mdf 05 Crystal Gray Shelves - Approximately 1, 80M - Height With Background And Without Doors. Interactive Slate Touch Screen, New Edge, 60Hz, Resolution 3, 840 X 2, 160, Contrast 4, 000: 1; With A Digitization Area Of ​​55, Maximum Frequency Of Pixels 594Mhz, Horizontal Scan 30 ~ 81Khz, Vertical Scan 48 ~ 75Hs.; Interface Standard 02 Hdmi, 01 Usb, 01 Audio Exit, 01 Rs232, 01Rj45, Wi-Fi And Bluetooth, Pixel Pitch 0.315 X 0.315; (Typical) 350 Cd/M2 (220 Cd/M2 With Glass), Vesa Support (Mm) 400 X 400 Mm, Edge Width; With Pedestal, 02 Passive Pen, Power Cord, Touch Out (Usb Upstream); - Bivolt, Rotating Chair - Slightly Curved Front Edge Seat So As Not To Obstruct Blood Circulation. - Minimum Depth - 470 Mm.Necosto: • Nylom Backrest With At Least 30% Textured Fiberglass • Flexible Screen Lining (Elastic Mesh) • Injected Lumbar Support For Reinforced Engineering Plastic With Reinforced Engine Fiberglass And Mechanism For Adjustment; Measurements: Minimum Width - 45Cm; - Minimum Height - 60Cm.Mecanism: • Synchronized Mechanism Relax With Adjustment In Various Lock Positions, Keeping Lumbar Support With Permanent Contact • Height Adjustment Lever And Regulating For Synchronized Relaxing Under The 2: 1 Proportion • Synchronized Movement Between The Backrest And The 2: 1 Proportion. • Voltage Adjustment By Handle Under The Seat Enabling The Movement Relax To The User Biotype • Anti-Unimpact System That Prevents The Backrest Of The Back User When Unlocking The Same • Finishing With Anti-Rust Pretreatment • Central Column Coupling System With Snap Cone • Height Adjustment Column By Gas Drive With A Minimum Of 100Mm Class 3 Class 3 Din 4550 Standard. Made Of Steel Tube Of Approximately 50Mm And 1, 50 Mm Thickness.Is: • Steel Plate Structure With Approximately 5Mm Thick • Height Adjustment Of Approximately 60Mm Of Course And At Least 3 Stages Of Positioning; Approximately 11Mm Dispensing With The Use Of Fastening Bushings; Casters: • Doubles With Wheels Of Approximately 50Mm In Diameter, Vertical Cold Steel Axle (Shaped) With A Diameter Of Approximately 11Mm, Endowed With Elastic Steel Ring That Allows Easy And Safe Coupling To The Base . Each Wheel Must Have Roller Bearing (Double Bearing), Replacing The Traditional Horizontal Axis And Central Hole Of Approximately 31Mm. Band In, 03/02/2025