Tenders Are Invited For Delivery And Assembly Of Photovoltaic Installations For Facilities Of The Polesie Municipal Medical Center In Łódź

3 Kasprzaka 27 In Łódź With A Power Of Min. 24 Kwp, 2) Ul. Kusocińskiego 140A In Łódź With A Power Of Min. 15 Kwp, 3) Ul. Marathńska 71 In Łódź With A Power Of Min. 39 Kwp, 4) Ul. Struga 86 In Łódź With A Power Of Min. 39 Kwp, 5) Ul. Wileńska 25 In Łódź With A Power Of Min. 15 Kwp And Comprehensive Technical Documentation With The Necessary Installation Documentation. The Employer Provides Screenshots Of Buildings With Their Dimensions. 2. Cpv Code Designations-Common Order Dictionary: 45310000-3 Electrical Installation Works09331200-0 Sunny Photoelectric Modules 4500000000-7 Construction Works71320000-7 Engineering Services In The Field Of Design3. The Subject Of The Contract Is Implemented In Connection With Resolution No. 17103/2024 Of The Provincial Fund For Environmental Protection And Water Management Under The Priority Program Łódź Res - An Increase In The Use Of Renewable Energy Sources In The Łódź Voivodeship, The Task: Res For Mcm Polesie In Łódź. 4. Installation Works Will Be Carried Out In The Functioning Health Care Facility In Which Patients Movement Takes Place, Therefore, The Supplies And Assembly Should Be Carried Out In A Slightly Burdensome Way For The Facility. The Contractor Is Obliged To Maintain Proper Order In The Workplace And Environment - Keeping It Free From Communication Obstacles As Well As Removing And Storing Unnecessary Materials, Waste And Garbage, As Well As Unnecessary Makeshift Devices (All Temporary Difficulties And/Or Blocking Communication Routes Requires Each Time Requires Earlier Arrangements With The Employer Appointed To Contact The Contractor. 5. The Location Of The Object. 7 The Installation Deployment Project Should Be Made Using Software For Designing Solar Installations. 10. The Project Should Be Provided For A Switch Cutting On The Solar Installation. If It Is Required, Only A Photovoltaic Installation From The Fire -Fighting Pwp.11 Power Switch Should Be Predicted. The Contractor Is Required To Agree The Design Of The Solar Installation With The Fire Protection Appraiser. 12. Flat Monocrystalline Modules With Efficiency Of Min. 21% And A Standard Guarantee Of Loss Of Efficiency For Min. 30 Years Of Work. 13. The Direction And Angle Of Inclination Of The Modules Should Be Selected In Such A Way As To Allow Optimal Operation Of The System And Obtaining The Highest Possible Amount Of Energy From Sunlight. 14. Power Of A Single Panel - Min 480 Max 510 Kwp 15. The Designed System Should Ensure Measurement Of Electricity Produced Along With The Possibility Of Remote Viewing Via The Web Browser. 16. The Ballast Structure For Photovoltaic Panels Should Be A Structure Dedicated To The Proposed Photovoltaic Panels And Have Appropriate Certificates. 17. Modules Should Be Founded On Dedicated Ballast Constructions With Strength Adapted To Weather Conditions. 18. The Wires Should Be Carried Out In Protective Tubes, Cable Channels. 19. Installations Should Be Protected Against Tight. 20. Inverter - The Install