Tenders Are Invited For Reconstruction Of The Road In The Liniewo Commune

1 3 The Contracting Authority Requires That Each Road Board Has The Manufacturers Designation. 4. Cds Should Be Made Of Concrete Concrete Class Min. C30/37, According To Pn-En 206-A2: 2021-08. The Permissible Dimensional Deviations Are For The Length Of The +/- 10 Mm Plate; For The Width Of The Plate +/- 6 Mm, For The Thickness Of The Plate +/- 5Mm; Reinforcement Thickness Deviations: From Below The Plate +/- 5 Mm; Main Reinforcement Deviations: For Length +/- 5 Mm. Double -Reinforced Steel Plates (Min 5.5 Fi To 10 Fi), Ribbed In The Form Of Tied Mesh: Lower And Upper.5. The Product Should Have An Abrasion Resistance Of 18000/5,000 (Mm3/Mm2) And Frost Resistance In Frost Resistance F 150. In Addition, The Plates Should Be Compressive To Compressive And Made Of Concrete With A Class Of Not Less Than C30/37 And Water Absorption Below 5% .6. The Surfaces Of The Slabs Should Be Without Scratches, Cracks And Concrete Cavities, With A Form From The Form Or Blocked, In Line With The Requirements. The Edges Of The Plates Should Be Even And Simple. 7. Cds Must Have Technical Approval Of The Road And Bridge Research Institute (Ibdim) Confirming The Performance Of Plates And Requirements For Prefabricated Concrete. 8. Delivery Of Discs Will Take Place Between 08:00 To 15:00 To Unloading Places Indicated By The Ordering Party In The Commune Of Liniewo-Lubieszyn, Liniewo Wiśniowa Street, Iłownica Towards Milonek, Piasek And Kruszywiwo Liniewo Plac At The Commune Office. 9. The Contractor Must Include Transport And Unloading Costs In The Price Of The Subject Of The Contract. The Plates Should Be Delivered In The Posts, Arranged One On The Other With A Road Layer Up To Allow The Quality Of The Plates (Cracks, Eruptions, Concrete Thickening). In The Case Of Delivery Of The Discs, The Employer Reserves The Right To Send Transport At The Contractors Expense. 10. Delivery Of Sand 0/2 In The Amount Of 275 Tons11. Delivery Of The C30/50 Aggregate Mixture In The Amount Of 75 Tons 12. The Contracting Authority Informs That By Specifying The Subject Of The Contract By Indicating Trade Names, It Also Allows All Their Market Counterparts Not Worse Than Indicated. The Parameters Of The Standard Indicated By The Employer Present Technical, Operational, Utility, Functional And Other Features Relevant To The Subject Of The Contract. However, The Indicated Brand Or Commercial Name Determines The Product Class, Not A Specific Manufacturer. The Employer Allows The Possibility Of Using Equivalent Materials In Relation To The Described Parameters Described And Given In The Required Parameters, Provided That They Have No Worse Technical Parameters. 13. The Contracting Authority Reserves The Right To Assess The Equivalence Of The Proposed Solutions. The Employer Also Reserves The Right To Use In This Regard From The Opinions Of Experts. The Landlord Demands That The Contractor Indicate In The Offer Part Of The Contract, Whose Performance Will Entrust To Subcontractors And To Provide