Tenders Are Invited For Partial Renovations Of Municipal Roads With Bitumen Surfaces In The Inowrocław Commune In 2025

The Subject Of The Order Is The Performance Of Construction Works Consisting In Partial Renovations Of Municipal Roads With Bitumen Surfaces In The Inowrocław Commune In 2025. The Scope Of Work Includes:1. Repair Of Pavement Cracks By Surface Sealing With Asphalt Emulsion And Grit: A) Repair Of Pavement Cracks By Double Surface Sealing With Asphalt Emulsion And Grit - Double Consolidation, - Cleaning Of The Work Site, - Sprinkling The Cracks With Asphalt Emulsion, - Double Consolidation With Grits Of Fractions 2/5 Mm And 5/ 8 Mm, - Mechanical Compaction Of The Mixture Using A Static Roller - Cleaning The Work Site. Estimated Number Of Works To Be Ordered: Up To 1,100 M22. Filling Pavement Defects With A Recycler Or Asphalt Mineral Mass - 4 Cm Deep Defects: A) Filling Pavement Defects With A Recycler Or Asphalt Mineral Mass - 4 Cm Deep Defect Without Cutting Out The Damaged Pavement - Cleaning The Place Where The Asphalt Surface Defect Occurs, - Filling The Defect With Mineral Mass - Asphalt From The Recycler, - Strengthening Of The Completed Filling Surface, - Smearing The Edges Of The Renovated Area With Asphalt Emulsion And Sprinkling With Aggregate, - Cleaning Up The Work Site And Removing The Rubble To The Appropriate Storage Place, Estimated Number Of Works To Be Ordered: Up To 500 M2b) Filling The Surface Defects With A Recycler Or A 4 Cm Deep Mass With Cutting Of The Damaged Surface - Incision Around The Bituminous Surface Defect With A Mechanical Saw, - Removing The Debris And Cleaning The Area Where The Surface Defect Occurred, - Filling The Defect With Mineral And Asphalt Mass From The Recycler, - Strengthening The Completed Surface Filling, - Smearing The Edges Of The Renovated Area With Asphalt Emulsion And Sprinkling With Aggregate, - Cleaning Up The Work Site And Transporting The Debris To The Appropriate Storage Place. Estimated Quantity Works To Order: Up To 700 M2additional Information Regarding The Execution Of The Item Order:1) The Ordering Party Assumes The Depth Of Filling The Surface Defects With A Recycler Or Mineral-Asphalt Mass At 4 Cm.2) The Contractor Is Obliged To Mark The Work Area In Accordance With The Regulation Of The Minister Of Infrastructure Of July 3, 2003 On Detailed Technical Conditions For Signals And Road Signs And Road Safety Devices And Conditions For Their Placement On Roads (Journal Of Laws Laws Of 2019, Item 2311, As Amended. Amended)3) Construction Works Should Be Performed In Accordance With Applicable Regulations.4) The Number Of Works Covered By This Order Is Indicative (Expected), With The Reservation That The Volume Of Works May Be Reduced, Which Depends On The Current Demand Of The Ordering Party For The Implementation Of The Works In Question.5) Ordering Party Will Commission Works That Are The Subject Of The Order According To Its Current Needs On The Basis Of Separate Orders Submitted To The Contractor In Writing Or Electronically Specifying The Scope, Date And Place Of Performance Work.6) E