Tenders Are Invited For Delivery Of A Used Cng-Powered Truck With A Tipper Body

Parameters And Technical Data That A Used Car Must Have; I. Chassis: 1. Year Of Production Not Older Than 2023.2. Mileage Not More Than 5,000.00 Km, Used Vehicle, 3. Chassis Type; Two -Axle 4X2, Back Twin Axis, 4. Front Suspension: Parabolic Springs, 5. Rear Suspension: Pneumatic, 6. Permissible Total Mass In The Range Of 6800-8000 Kg, 7. A Engine With A Power Of Not Less Than 130 Hp (Cng), 8. The Engine Is Branded For Combustion Of Natural Gas Cng. The Engine Must Come From Serial Production, Prototypes Are Not Allowed, 9. Manual Gearbox 6 Running + Reverse Gear, 10. Diaper Spacing In The 4000 Mm Range - 4200 Mm, 11. Abs, Ebs, 12. Three -Person Vehicle, 13. Air Conditioning, 14. Cabin In Orange Or White - Factory Painting, 15. Technical Load Capacity Of The Front Suspension Not Less Than 2500 Kg, 16. Technical Load Capacity Of The Rear Suspension Not Less Than 5000 Kg, 17. Blocking Of The Rear Bridge Differential Mechanism Or Electronic Lock System, 18. Disc Brakes On All Axes, 19. Gas Tanks With A Capacity Of Not Less Than 240 Liters, 20. Cushioned Comfortable Driver With Adjustment, 21. Window In The Back Wall Of The Cabin, 22. Digital Tachograph, 23. Chassis Adapted For Municipal Development, 24. Euro 6.25 Emissions Standard. Factory Tires With A Size Of 16 Inch, 26. Electric Lowered Windows, 27. Heated And Electric Mirrors, 28. Radio, 29. Petwork, 30. Triangle, 31. Hydraulic Lift, 32. Circle For Wheels, 33. Firefighting, 34. Bridges Of The Rear Wheels With Chlappers, 35. Steel Cover Of The Radiator And Oil Bowl, 36. Side Entrance Covers, 37. Rear Entrance Beam, 38. Led Daytime Running Lights, Ii. Buildings-3-Side Dump Truck1. Year Of Production Not Older Than 2023.2. Internal Dimensions Of The Gearbox- Length In The Range Of 4400-4600 Mm,- Width In The Range 2000 -2100 Mm,- Height Of The Burt Min. 400 Mm + Mesh Extensions In The 1000 Mm Range - 1200 Mm.3. The Intermediate Frame And The Self -Loading Chest Adapted For Tipping Backwards And Sideways, 4. Hot Steel Intermediate Frame, 5. Sandblasted And Powder Painted Chest, 6. A Six -Speed Actuator Enabling A Large Tipping Angle, 7. Burt Height Min. 400 Mm, Aluminum, 8. On The Front Side Of The Mesh Protecting The Drivers Cabin, 9. Steel Box Floor, Smooth 3 Mm Thick. 10. Rear Side Tilting In The Lower Axis + Extended Sidelight (Like Doors) 11. Side Sides Traditionally Opened Down, 12. Rear: Side Open To The Bottom, Mesh Extensions Opened In The Form Of A Door, 13. Electrical Control On The Remote Control, 14. Power Pack Power Supply, 15. Rear Lamp Shields, 16. External Lighting: Diode, In Accordance With Traffic Regulations + Stroke Lighting, 17. Tarpaulin On A Roll, 18. Side Extensions From A Mesh With A Height In The Range Of 1000 Mm - 1200 Mm Divided In Half And Tilting In The Upper Axis, With A Throw -In On The Right. Vehicle Collection.