Bids Are Invited For Acquisition Of A Uom - Movel Dental Consultation

Vehicle 0 Km, Year/Model 2024/2025 - Type, Van Adapted For Mobile Dental Unit; Minimum Power Of 100 Hp; Min Displacement 2,000 Cc; Electronic Injection; 70 L Min Fuel Tank; Tachometer; Min Internal Height Of 1,800 Mm In The Service Hall, With Volumetric Capacity Of No Less Than 10M3; Sliding Side Door; Two Rear Doors; Electrical Central Consisting Of Thermal And Automatic Circuit Breaker, Relays, Fuse Base Installed On The Lower Back Of The Cabinet; Internal Electrical Panel On The Bench, Integrated Ruler With At Least Two Tri-Polar Sockets (2P+T) Of 110~127 Vac; Switches For Hall Lighting And Ventilation; External Socket (Tri Polar) For Collecting Energy Installed In The Electrical Center At The Rear Of The Vehicle With Access Through The Rear Door; Extension Wire Compatible With The Plug System, At Least 20 Meters Long; Automatic Transformer Connected To The Pickup Socket, Which Allows The Car To Be Connected To An Electrical Network Of Both 110 And 220 Vac, Which Always Provides 110 Vac For Internal Sockets, Lights, Dental And Electrical Equipment Inside The Vehicle And Still 220 Vac P / Split Air Conditioning; Lighting In The Vehicles Service Compartment Must Be Of Two Types: Natural - Through Lighting Provided By The Vehicles Windows (Cabin And Body), With Opaque Or Sandblasted Glass In The Lower 2/3 Of The Service Compartment; And Artificial - Must Be Provided By At Least Seven Luminaires, Installed On The Ceiling, Six Of Which Are 110 Vac And One Is Emergency 12 Vdc, With A Minimum Diameter Of 200 Mm, On A Stamped Base In Aluminum Or Injected Plastic, White In Led Model. Dental Equipment That Should Accompany The Mobile Dental Unit: Dental Compressor (Min 38L) With Filtration System; 70Kvp Portable Dental X-Ray Device, With Tube Current Between 7Ma And 9Ma, Radiation Field Of Maximum 60 Mm And Focal Point Of 0.8 X 0.8; Beep S, 01/23/2025