Bids Are Invited For Price Registration For The Future And Possible Acquisition Of Led Lights, Fixing Support And Curved Arm For Public Roads, To Meet The Needs Of The Municipal Department Of Works, Public Services And Engineering.

135W Led Arm End Luminaire. Luminaires Must Be Manufactured From Injected Or Extruded Aluminum. They Must Have Couplings And Connections For A Ø 53Mm Arm; It Is Mandatory To Have An Articulated Arm Hitch That Allows Angle Adjustment Of At Least 10° Degrees Downwards And 10° Degrees Upwards (Angle Adjustments Made Only By Screws On Fixed Couplings Are Not Accepted). The Luminaire Must Have A Heat Dissipation System Using Fins Exposed To The Weather For Proper Thermal Exchange. These Fins Must Form A Single Piece With The Surface On Which The Led Board(S) Will Be Installed. Fins, Fitted, Screwed, Glued Or Welded Will Not Be Accepted. The Optical Assembly Must Have Light Beam Distribution Lenses Made Of Thermoresistant Polymers With Anti-Yellowing Additives That Have Been Subjected To An Artificial Weathering Test In Accordance With The Astm G154 Standard. This Lens(Es) Must Be Secured With Weather-Resistant Screws; Fitted, Quick-Closing, Or Clip-On Lenses Will Not Be Accepted As These May Lose Pressure And Warp Over Time And Use. The Luminaire Must Have Identification Made With Laser Engraving On The Body Of The Luminaire With The Information: Name Of The Municipality, Power Of The Luminaire. Luminaire, Efficiency, Color Temperature And Date Of Production Of The Batch (Laser Engraving Is Necessary To Control Warranty And Theft, Since Adhesive Labels Can Be Easily Removed). Sealing The Vital Parts Of The Luminaires (Optical And Housing Of Electronic Components), Must Be Protected Against Ingress Of Solid Particles, Dust And Humidity, Certified By At Least Ip66; And, It Has Protection Against Mechanical Impacts, Certified By At Least Ik08. The Sealing System Of The Luminaires Must Be Made Up Of Gasket(S), Resistant To High Temperatures. This Gasket(S) Must Be Fixed By Mechanical Pressure Between The Lens(S) Of The Optical Assembly And The Housing. Sound, 70W Led Lamp For The End Of The Arm. Luminaires Must Be Manufactured From Injected Or Extruded Aluminum. They Must Have Couplings And Connections For A Ø 53Mm Arm; It Is Mandatory To Have An Articulated Arm Hitch That Allows Angle Adjustment Of At Least 10° Degrees Downwards And 10° Degrees Upwards (Angle Adjustments Made Only By Screws On Fixed Couplings Are Not Accepted). The Luminaire Must Have A Heat Dissipation System Using Fins Exposed To The Weather For Proper Thermal Exchange. These Fins Must Form A Single Piece With The Surface On Which The Led Board(S) Will Be Installed, Resistant To High Temperatures. This Gasket(S) Must Be Fixed By Mechanical Pressure Between The Lens(S) Of The Optical Assembly And The Housing. Add, 110W Led Arm Light. Luminaires Must Be Manufactured From Injected Or Extruded Aluminum. They Must Have Couplings And Connections For A Ø 53Mm Arm; It Is Mandatory To Have An Articulated Arm Hitch That Allows Angle Adjustment Of At Least 10° Degrees Downwards And 10° Degrees Upwards (Angle Adjustments Made Only By Screws On Fixed Couplings Are Not Accepted). The Luminaire Must Have A Heat Dissipation System Using Fins Exposed To The Weather For Proper Thermal Exchange. These Fins Must Form A Single Piece With The Surface On Which The L Plate(S) Will Be Installed.