Bids Are Invited For Hiring A Company Specialized In Electrical Engineering To Provide Public Lighting Services.

Management Of Public Lighting In The Municipality, Including Technical Assistance, Supply Of A Computerized System, Call Center, Engineering, Operational Support For Planning, Control And Supervision For 1845 Points (Annual), Points That Have Led Luminaires Still Under Warranty Must Be Noted The Address And Quantity Of Defective Luminaires To Activate The Manufacturers Warranty., Supply Of Material And Labor With Technical Team And Winch Truck For Routine Maintenance Of The Lighting Of Squares And Public Roads In The Municipality (Led Lights, And If A Bulb Is Burnt Out, It Is Mandatory To Replace The Complete Kit, Being Bulb And Ballast)., Electrical Project Complete For The Implementation Of New Public Lighting Points With Possible Extension Of Network, Composed Of: Single-Family Diagram, Layout, Topography, Load Ratio, Descriptive Memorandum, Traction Effort Calculation, Plotters, Additional Documentation For Approval With The Local Concessionaire., Supply And Implementation Of Public Luminaire With Led Technology, With Arm, With Base On High-Pressure Injected Aluminum Rods And Repoussé Aluminum Hood. With Electrostatic Powder Coated Polyester Paint With Uv Protection. Maximum Total Power Of 100 W. With Color Temperature Between 4,000 K To 5,000 K +- 200 K). Minimum Luminous Flux Of 5,800 Lm; Proven Through Report. Each Led Must Be Equipped With A Specific Lens, Resulting In A Standard Photometric Curve For Public Lighting. With Diffuser In Smooth Tempered Glass, Screen Printed, With High Mechanical Resistance (Ik 08). The Optical Block Must Ensure Degree Of Protection Ip 66. The Fixing Must Be Made On The Top Of A Pole Or On An Arm Up To 60 Mm In Diameter. The Fixing System Must Use Holes For Anti-Theft Screws. Electrical Kit Composed Of Integrated Power Supply And Current Regulator, With Service Voltage At 220V, 60 Hz, Alternating Current And Direct Current Output Stabilized At 500Ma. It Must Come With Software, Based On High-Pressure Injected Aluminum Rods And A Repoussé Aluminum Hood. With Electrostatic Powder Coated Polyester Paint With Uv Protection. Maximum Total Power Of 120 W. With Color Temperature Between 4,000 K To 5,000 K +- 200 K). Minimum Luminous Flux Of 14,000 Lm; Proven Through Report. Each Led Must Be Equipped With A Specific Lens, Alternating Current And Direct Current Output Stabilized At 500Ma. Must Accompany Software With Cur, 01/20/2025, Based On High Pressure Injected Aluminum Rods And Repoussed Aluminum Hood. With Electrostatic Powder Coated Polyester Paint With Uv Protection. Maximum Total Power Of 150 W. With Color Temperature Between 4,000 K To 5,000 K +- 200 K). Minimum Luminous Flux Of 18,000 Lm; Proven Through Report. Each Led Must Be Equipped With A Specific Lens, With A Working Voltage Of 220 V, Alternating Current And Direct Current Output Stabilized At 500 Ma. Must Accompany Software C, Supply Of Material And Labor With Technical Team And Winch Truck For Maintenance Or Replacement Of Led Luminaire Ufo High Bay Galpão Industrial 100 W Cold White, 6,500 K, Supply Of Material And Labor With Technical And Winch Truck For Maintenance Of Circuit Breaker Panel 48 Circuit Breakers, 100 A Bus, Supply Of Complete Starter Key Material, Model 3 Horsepower 220 V? Two-Phase 32 Amps, 5 Horsepower Model 220 V? Two-Phase 32 Amps, Model 10