Request For Quotation Instruments Included In The List Subject To Withdrawal From The National Regime

Stapler For Staples 6-In-1, Type 53, 53F, 140, 13, 300, 500 (3188). Stapler Furniture Construction For Work On Furniture Upholstery, Stapler For Flat Staples, As Well As Pins And Nails. With Plate Spring. Minimum Compression Force Adjustment Of Impact Force For Different Staple Lengths. Safe Fixing Of The Handle. Reinforced Steel Case. The Length Of The Nail Is 16 Mm. Fasteners Staples, Nails And Pins. The Maximum Length Of The Staple Is 14 Mm. The Minimum Length Of The Bracket Is 6 Mm, The Body Material Is Metal. The Size Of The Pins Is 16 Mm. Metal Handle. Plate Spring Type, Consumable Type 53, 53F, 13, 140, 300, 500. Place Of Delivery - Karaganda Region, Temyrtau, Prospekt Respubliki, 13A, To Coordinate The Goods With The Customer In Advance, With The Provision Of Documents Confirming The Compliance Of The Delivered Goods With The Requirements , Established By Technical Regulations, Provisions Of Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., A Furniture Stapler In An Aluminum Case, With The Function Of Adjusting The Impact Force, Is Compatible With Type 13 And 53 Staples Of 6-16 Mm Size And Type 300 Nails Of 16 Mm Size. A Tool For Fixing Hardboard, Plywood, Fiberboard, Chipboard, Film, Insulation And Other Sheet Materials On A Wooden Base. For Assembling And Covering Furniture, Laying Carpets And Insulating Materials, Performing Baguette Works. Suitable For Professional Use. A Two-Position Switch That Regulates The Impact Force Facilitates Work With Long Staples And Hard Materials. Long, Thin Nose — For Working In Limited Space. Balanced Design — There Is No Kickback When Using A Stapler. Durability — The Body Is Resistant To Damage, Because Made By Casting From Aluminum Alloy. Safety - The Handle Is Fixed In A Horizontal Position, Preventing Accidental Activation Of The Mechanism. Easy Control Of The Number Of Fasteners - With The Help Of A Special Window, You Can See How Many Staples Are Left And Load Them In Time. Ergonomic Handle For Optimal Hand Position. Characteristics: Body Material: Aluminum Handle Material: Steel Number Of Components In The Handle: Ergonomic, Plastic Overlay Type Of Staples: 13, 53 Size Of Staples: 6-16 Mm Impact Force Regulation: Two-Position Features: Fast Loading Of Stapler, Spring-Type Impact Mechanism Suitable Consumables: Staples, Nails Place Of Delivery - Karagandy Region, Temyrtau, Prospect Respublika, 13A, Prior To Agreeing The Goods With The Customer, With The Provision Of Documents Confirming Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Provisions Of Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan., Drainage Pump Intended For Pumping Water From Rivers And Reservoirs, With An Average Level Of Water Pollution, Are Also Used For Irrigation And Water Supply From The Depths. Automatic Blocking. The Float Switch Should Turn Off The Pump When The Water Level Drops, Allowing To Avoid Overheating And Its Failure. When The Water Level Rises, The Pump Turns Off. The Type Of Submersible Pump Is Standard Water Surface - 8 M., Immersion Depth - 8 M., Saximal Pressure 8 M., Capacity - 12.96 Cubic Meters. M/Hour, Mains Voltage - 220/230 V, Power Consumption - 550 W, Nominal Power - 550 W, Functions - Overheating Protection, Float Switch, Cable, Fitting Included. The Quality Of The Water Is Dirty, The Size Of The Passing Particles Is 35 Mm, The Permissible Temperature Of The Liquid Is From 1°C To 35°C. The Body Material Is Plastic. The Pump Mechanism Is Centrifugal. The Diameter Of The Thread Of The Exit Hole (G) 1½″, ½″, 1/2, The Length Of The Power Cord Is 10 M, Pump Installation Vertical Plastic Impact-Resistant Case; Automatic Operation Thanks To The Float Switch; Overheating Protection; Handle For Easy Carrying; For Pumping Out Any Not Very Aggressive Liquids. Place Of Delivery - Karagandy Region, Temyrtau, Prospekt Respublika, 13A, Prior To Agreeing The Goods With The Customer, With The Provision Of Documents Confirming Compliance Of The Supplied Goods With The Requirements Established By Technical Regulations, Provisions Of Standards And Other Documents In Accordance With The Legislation Of The Republic Of Kazakhstan.