Tenders Are Invited For Gas-Fitting Installation Work – Sv-Cmü-250113-001 - Etf-A_Neubau Workshop, User-Specific System Compressed Air/Technical Gases

Gas-Fitting Installation Work – Sv-Cmü-250113-001 - Etf-A_Neubau Workshop, User-Specific System Compressed Air/Technical Gases. Three Buildings Will Be Built In The Area, Of Which The Head Building And The Workshop Hall Will Each Be Supplied With Compressed Air And Technical Gases. In The Head Section Of The Building, A Central Gas Supply Will Be Built On The Second Floor And Will Be Used To Supply The Entire Laboratory Area And Testing Workshops In The Head Section. For This Purpose, The Gases Are Distributed Via An Extensive Distribution Network From The Second Floor To The Ground Floor. The Workshop Hall Has Another Gas Cylinder Storage On The Ground Floor And Its Own Distribution Network. There Is Also A Central Technology Area On The Second Floor Of The Workshop Hall, Which Is Intended To Ensure The Supply Of Compressed Air To Both Buildings. From Here, All Compressed Air Requirements Are Covered Via A Compressed Air Storage And An Extensive Distribution Network. In Parts, Compressed Air Is Led To Floor Tanks And Electrical Columns Located In The Area Of ​​The Workshop Hall Using Gauge Tubes Under The Floor Plate. Due To The Thermal Requirements In This Technical Area, Additional Ventilation Is Required To Remove The Waste Heat From The Compressors If Necessary. In Summary, The Work Includes The Following Non-Exhaustive Activities: Delivery, Installation And Assembly Of Pipes And Components, Distribution Lines Or Pipeline Networks In The Corridors, False Ceilings And Shafts, Construction Of Main Routes And Floor Exits, Rough Assembly Of The Routes, Installation Of Compressors And Pressure Accumulators, Installation Of Components Such As Gas Cabinets And Fittings, Fine Assembly, Outlets And Tapping Points, Connection Of Laboratory Equipment, Pressure Testing, Adjustment And Commissioning, Cleaning Of Components And Devices, Flushing Of The Pipelines, Joint Commissioning Of The Main Components In Close Cooperation With Building Automation And Security Monitoring, Creation Of Inventory Documentation, Acceptance And Handover;