Bids Are Invited For Price Registration For Purchase Of Furniture (Bunk Beds)

Steel Bunk Bed, Minimum Features: Main Structure Made Of Rectangular Metalon (50 With Five (05) Square Steel Tubes (20 20) Mm Of Steel Sheet 14 With A Minimum Thickness Of 1, And The Platforms Must Be Welded To The Stringers, Which Will Be Accompanied By Plywood Sheet With A Minimum Thickness Of 18 Mm. Upper Bed Equipped With A Protective Grid On The Right And Left Sides And Will Be Fixed To The Stringers Using Screws, Nuts And Washers, With A Square Tube Measuring (20 X 20) Mm With Steel Sheet 14 Minimum Thickness 1, With Spans Not Exceeding 0.15 M And Measures 1.20 M Long X 0.28 M Tall. Ladder Composed Of 02 Steps Fixed On The Side, Both Made Of Rectangular Metalon 30 The Stringers Must Be Made Of Rectangular Metalon (100 X 30) Mm Of Steel Sheet 14 With A Minimum Thickness Of 1.90 Mm (Sae 1006-1020). The Lower And Upper Ends Of The Main Support Structure Must Be Sealed With Steel Plate 14 Minimum Thickness -L, 90Mm (Sae 1006-1020) Welded; The Lower Extremities (Feet) Must Be Provided With Shoes Made Of 100% Injected Polypropylene In Black. Bunk Bed Measurements: Width 0.85 M X Length 1.98 M X Height 1.60 M (Variation +/-1%). The Bunk Bed Must Be Detachable, Using Sets Of 03 (Three) Steel Screws, Nuts And Washers 7/80 All Fittings Of Screws, Nuts And Washers Must Be Carried Out In Such A Way That The Parts Are Protected, Avoiding Cuts, Scratches And Other Risks To Users. Finishing The Structure With High-Resistance Electronic Mig Welding And Eliminating Burrs And Welding Spatters. The Entire Metal Part Of The Material, After Individual Assembly Of The Subassemblies, 01/13/2025