Bids Are Invited For The Purpose Of This Bidding Procedure Is To Record Prices With The Purpose Of Selecting The Most Advantageous Proposal For Future And Eventual Acquisitions Of Electrical Materials For The Maintenance And Expansion Of Municipal Public Lighting In Passo De Torres/Sc, According To The Specifications Minimum Values ​​Contained In The Notice, Terms Of Reference And Other Annexes.

Adapter For Led Luminaire, With Adjustment To Fit The Arm From 25 To 48 Mm In Diameter, With Two Stainless Steel Screws, Base For Photoelectric Relay 1000 W, Hot-Dip Galvanized Base And In Compliance With Nbr 5123, Dielectric Strength Of 2500 V , Current: 10 A, 360º Rotating Socket, Pvc, 3-Wire Connection: Phase 1 (Black), Neutral Or Phase 2 (White) And Load (Red), Indelible Marking Map With Identification Of The Relay Fitting Direction And Identification Of The Plugging Terminals., Reinforced Porcelain Nozzle E-27., Reinforced Porcelain Nozzle E-40., Curved Arm For Public Lighting 3000 Mm For Public Lighting 25 Mm 1000 Mm, Wall 2 Mm Hot Galvanized, With Minimum Layer Thickness Of 100 Microns, Straight Arm For Public Lighting 2500Mmx48, Tube Thickness Of 3Mm, With Shoe, Hot Galvanized With Minimum Layer Thickness Of 100Micras, Manufactured From The Year 2021., Cinta Circular 180Mm With Two Screws And Nuts Hot-Dip Galvanized With A Minimum Layer Thickness Of 100 Microns, Circular Belt 200Mm With Two Screws And Nuts Hot-Dip Galvanized With A Minimum Layer Thickness Of 100 Microns, Circular Belt 220Mm With Two Screws And Nuts Hot-Dip Galvanized With Minimum Layer Thickness 100 Microns, Circular Belt 240Mm With Two Screws And Nuts Hot Dip Galvanized With Minimum Layer Thickness Of 100 Microns, Circular Belt 260Mm With Two Screws And Nuts Hot Dipped Galvanized With Minimum Layer Thick 100 Microns, Solid Copper Conductor 1 , 5Mm² Soft Temper, Class 1 Stranding, Pvc/A Insulation 70º C - Extruded Thermoplastic Compound Based On Polyvinyl Chloride, With Special Characteristics For Non-Propagation And Self-Extinguishing Of Fire, Possessing Characteristics To Provide A Good Finish And Facilitate The Sliding Of Wires Through Conduits., Solid Copper Conductor 2.5Mm² Soft Tempera, Pvc Insulation/A70ºc, Extruded Thermoplastic Composite Based On Polyvinyl Chloride, With Special Characteristics For Non-Propagation And Self-Extinguishing Of Fire, Possessing Characteristics To Provide A Good Finish And Facilitate The Sliding Of Wires Through Conduits., Bimetallic Connector, Derivator Type Split Screw Cable Wire 1 Screw 10 To 50Mm; Squeeze Connection. High Electrical Conductivity And Corrosion Resistance. Allows Bimetallic Connections., Simultaneous Clamping Connector, Through Insulation Perforation Used In Low Voltage In Polymeric Material And Tinned Copper Contacts. Main Contact 10/95Mm And Derivation 1.5/10Mm., Black Pvc Insulating Tape 20 Meters - 19 Mm With Inmetro And Procel Certification, Lamp Sodium Vapor 70W E-27, Tubular Bulb 50/60Hz, Minimum Luminous Flux 6000 Lm, With Inmetro E Procel Certification, Smd Led Luminaire. Minimum Efficiency 170Lm/W. Effective Luminous Flux Between 31000 And 36000Lm. Operating Voltage Between 110 And 233V. Minimum Irc 70. Color Temperature 5000K. Operating Frequency: 60 Hz. Power Factor: Equal Or Greater Than 0.92; Voltage Range 110Vac Or Lower And Maximum 233Vac Or Greater; Surge Protection (Dps) 10Kv /10Ka. Abnt Ansi C62 Standard, 41. Internal And External Wiring According To Abnt Nbr 15129. Built-In Socket For Photocontroller Relay: Must Be Available