Bids Are Invited For Acquisition Of A Sixtached School Set And 8-Seater Childrens Cafetery, Designed To Meet The Needs Of Educational Institutions Linked To The Municipal Secretariat Of Education And Culture

Hexagonal School Set: Colorful Childrens Set Composed Of 06 Chairs, 06 Desks And 01 Central Table Forming A Flower. Chairs And Desks Manufactured With Metal Structure In 3/4-Wall Tube 0.90 Mm With Reinforcement On The Feet Of The Desks; All Metals Are Welded With Special Mig Welding; Desk Top Made Of 15Mm Mdf Covered In Glossy Smooth Colored Formica, With Fitting To Perfectly Join The Circular Central Table Also In 15Mm Mdf Covered In White Formica; Finishing Of Desks And Chairs With Ball-Type High-Resistance Polypropylene Tips. Features: Wallet With Round Iron Book Holder Grid; Rounded Table Edges, Finished In T-Type Pvc Profile In Black; Center Table Frame Made From 20X20mm Tube And Toothpick Feet Made From 30X30mm Tube; Chairs Made From 10Mm Semi-Anatomical Multilaminated Plywood; Seat Size 30X30cm And Backrest 30X16cm, Covered In Smooth Glossy Formica 0.8Mm In Six Colors; Seat And Back Of Chairs Fixed With Aluminum Rivets To The Structure; The Desks With A Total Height Of 58Cm And The Chairs Measuring 32Cm In Height From The Floor To The Seat; Metallic Structures Receive Anti-Rust Treatment And Epoxy Polyester Powder Painting; Total Table Joint Diameter 134Cm, Dining Room Set With 08 Childrens Seats: The Table Must Be Composed Of Modular Tops Made Of High-Impact Injected Abs, Formed By 4 Modules That Are Attached To The Structure By Means Of Fittings, 4 Fittings In The Table Sides (2 On Each Side) And 3 Central Slots Per Module And 4 Screws Per Module. After Assembled, The Table Measures 2480X820mm And Is 590Mm High. The Structure Must Be Formed By A Frame Made Of 1010/1020 Steel Tube Of Section 20X40mm With 1.2Mm Composed Of 3 Crossbeams And 2 Headboards. In The Four Corners Of The Frame, In The Lower Part Of It, 1010/1020 Steel Cones Are Welded, Where The Table Legs Are Fitted. These Cones Are Made From Ø2? Tube, With 2.25Mm Wall Thickness And Internally Receive A Conical And Expandable Plastic Bushing That Fixes The Legs Without The Need For Screws. The Legs Must Be Made From 1010/1020 Ø1 Steel Tube. 1/2?X0, 9Mm Wall And Fitted Without Use Of Screws. At The Lower End Of Each Foot There Is A Height-Adjustable Shoe For Leveling The Table, Made Of Polypropylene. All Metal Parts That Make Up The Table Receive Anti-Corrosive Treatment And Epoxy Paint. The Chair Must Be Composed Of Metallic Structures, Plastic Feet, Seat And Back. The Seat Must Be Manufactured From Injected Polypropylene Copolymer, Anatomically Molded With A Polished Finish, With Approximate Dimensions Of 330 Mm Wide, 320 Mm Deep, 5 Mm Wall Thickness And Rounded Corners, Joined To The Structure By Means Of 4 (Four) Cavities Reinforced With Fins, Which Accommodate Screws For Plastic Fl Diameter 5X30 Mm Phillips Slot. It Must Also Have A Rounded Front Edge So As Not To Obstruct The Users Blood Circulation. The Height Of The Seat To The Floor Must Be Approximately 460 Mm. The Backrest Must Be One-Piece, Without Openings, Made Of Injected Copolymer Polypropylene, With Approximate Dimensions Of 330 Mm Wide By 165 Mm High, With Spikes, 01/10/2025