Request For Quotation Purchase Of Medical Products

Cannulated Screw, 3.75 Mm X 34 Mm With Incomplete Thread, Set: 4 Anchors - 4.75, Tape, Disposable Punch, Thread No. 2, Braided Blue, Absorbable, Biocomposite Suture Screw, 4.75 Mm X 19.1 Mm, Closed Loop, Suture Button For Reconstruction Of Cruciate Ligaments With A Fixed Loop Of Adjustable Size Made Of Titanium Alloy Length 13.5 Mm And Width 3.5 Mm, Drilling Needle, Open Eye, 4 Mm, Drilling Needle, Closed Eye, 4 Mm, Interference Screw Cannulated With Full Thread, 7 X 28 Mm, Interference Screw Cannulated With Full Thread, 8 X 28 Mm, Set On Mpfl Without Tools, Double Needle For Plastic Meniscus With Thread #2-0, Bracket 8 X 20 Mm, Bracket 11 X 20 Mm, Bracket 16 X 20 Mm, The Thread Tensioner Needle Should Consist Of A Rod, A Plastic Shank-Locker Fixed In The Trigger Mechanism Of The Thread Tensioner And A Working Part In The Form Of A Flat Needle. The Width Of The Flat Needle Is No More Than 1.5 Mm. The Needle Should Have A Groove In The Distal Part For Holding And Passing The Thread. It Should Ensure The Execution Of Several Threads During One Operation. Must Be Delivered Sterile. Must Be Intended For Single Use., The Marking Hook Should Have An Arc-Shaped Tip With Three Notches In The Distal Part, And A Handle With Three Notches In The Proximal Part. The Notches Should Provide A Selection Of The Offset Value. A Spring Mechanism Should Be Located In The Handle, Which Ensures Immobility Of The Hook. Made Of Stainless Steel., The Guide For The Marking Hook Should Be Intended For Meniscus Restoration. The Working Part Must Have A Locking Mechanism In The Form Of A Button, Ensuring Immobility Of The Hook. The Guide Part Should Be Trapezoidal. It Must Have A Marking Of The Turning Angle And A Pitch Of No More Than 5°, Thread Tensioner Needle. It Should Consist Of A Barrel, A Plastic Retainer Fixed In The Trigger Mechanism Of The Thread Tensioner And A Working Part In The Form Of A Flat Needle., Thread Tensioner, 90° Curved, Right, Thread Tensioner, 90° Curved, Left